What is EOTA?
The European Organisation for Technical Approvals (EOTA) comprises the Approval Bodies nominated to issue European Technical Approvals (ETAs) by EU Member States and EFTA States who have contracted to the European Economic Area Agreement.
A construction product with an ETA, satisfying the Attestation of Conformity provisions, can carry CE marking and can be placed on the market in any of these EEA countries.
EOTA has been constituted as a legal body under Belgian law, with four organisational levels: Plenary Meeting - Executive Commission - Technical Board - Working Groups.
The role of EOTA is primarily to monitor and progress the drafting of ETA Guidelines (ETAGs) and to co-ordinate all activities relating to the issuing of ETA's. EOTA operates in close co-operation with the European Commission, EFTA, CEN, European trade associations and industrial organisations, who are also present as observers at various EOTA levels.
EOTA is born out of the Construction Products Directive 89/106/EC (CPD). The goal of the CPD is the removal of technical barriers in the construction products sector through :
Products are fit for their intended use if they comply with a Harmonised Standard, a European Technical Approval or a non-harmonised technical specification recognised at EC level.
What is an ETA?
A European Technical Approval (ETA) for a construction product is a favourable technical assessment of its fitness for an intended use, based on the contribution made by this product to the fulfilment of the six Essential Requirements, as stated in the CPD for the construction works in which the product is installed.
An ETA can be granted when any of the following conditions apply:
In conjunction with an Attestation of Conformity procedure (which is intended to ensure that the product specification set out in an ETA is maintained by the manufacturer), ETAs allow manufacturers to place CE marking on their products.
Although in certain circumstances it may be possible for an ETA to be issued on the basis of a common assessment procedure agreed among EOTA members (according to the art. 9.2 of the Council Directive 89/106/EEC) in most cases an ETA for a product will be granted to a manufacturer based on the assessment principles set out in an ETA Guideline for the relevant product sector. When a European Technical Approval has been issued it is valid in all EEA countries, for a period of five years, renewable thereafter.
What is an ETAG?
An ETA Guideline (ETAG) is a document drafted by and for the EOTA Approval Bodies as a result of a mandate from the European Commission and EFTA. Its basic aim is to establish how Approval Bodies should evaluate the specific characteristics/requirements of a product or family of products. According to the CPD Guidelines must comprise the following:
An ETAG is a binding document which requires the approval of EOTA, the consultation of the Standing Committee and the publication by Member States in their respective official language(s).
In order to ensure that ETAGs are as technically sound as possible, EOTA is strongly in favour of co-operation with other bodies, in particular with European industrial organisations. In Working Groups it is especially important that all interested parties who can contribute in a positive way have the possibility to participate. EOTA encourages therefore co-operation to take place on all levels and in the most suitable form.
Technical experts of relevant European industrial organisations can contribute directly as members of Working Groups, provided they are designated by these organisations on the basis of their technical experience in the subject concerned and in order to contribute in an impartial but positive way.
EOTA Member List!
| Click on the country of your choice. | ||||
 |
 |
 |
 |
 |
| Austria. | Belgium. | Cyprus. | Czech Republic. | Denmark. |
 |
 |
 |
 |
 |
| Finland. | France. | Germany. | Greece. | Hungary. |
 |
 |
 |
 |
 |
| Iceland. | Ireland. | Italy. | Latvia. | Lithuania. |
 |
 |
 |
 |
 |
| Luxemburg. | Netherlands. | Norway. | Poland. | Portugal. |
 |
 |
 |
 |
 |
| Slovak Republic. | Slovenia. | Spain. | Sweden. | Switzerland. |
 |
 |
|||
| United Kingdom. | Turkey. | |||
EOTA Working Groups
| To consult the composition of the relevant EOTA WG, click on the number of the WG in the left column underneath | ||||||||||||
| Active Working Groups | Expected deadline | |||||||||||
| 1 |
Metal anchors for use in concrete Part 1: Anchors in general (1st amendment) Part 2: Torque-controlled expansion anchors (1st amendment) Part 3: Undercut anchors Part 4: Deformation-controlled anchors (1st amendment) Part 5: Bonded anchors (2nd amendment) |
Endorsed Endorsed Endorsed Endorsed Endorsed |
||||||||||
| 2 | Part 6: Metal anchors for use in concrete for fixing lightweight systems | Endorsed | ||||||||||
| 3 |
Plastic anchors for use in concrete and masonry Part 1: General Part 2: For use in normal weight concrete Part 3: For use in solid masonry materials Part 4: For use in hollow or perforated masonry Part 5: For use in autoclaved aerated concrete Part: For use in lightweight aggregated concrete Part: For ETICS |
|
||||||||||
| 4 | Metal injection anchors for use in masonry | Endorsed | ||||||||||
| 5 |
Structural Sealant Glazing Systems Part 1: Supported and Unsupported Systems Part 2: Coated Aluminium Part 3: Thermal Breaks Part 4: Opacified Glazings |
Endorsed Endorsed Endorsed On hold |
||||||||||
| 6 | External Thermal Insulation Composite Systems/kits with rendering | Endorsed | ||||||||||
| 7 | Non-loadbearing permanent shuttering systems based on hollow blocks or panels of insulating materials and, sometimes, concrete | Endorsed | ||||||||||
| 8 | Systems of mechanically fastened flexible roof waterproofing membranes | Endorsed | ||||||||||
| 9 | Liquid applied roof waterproofing kits | Endorsed | ||||||||||
| 10 | Internal partition kits | Endorsed | ||||||||||
| 11 | Self-supporting translucent roof kits (except glass-based kits) | Endorsed | ||||||||||
| 12 | Prefabricated stair kits | Endorsed | ||||||||||
| 13 | Post-tensioning kits for the prestressing of structures | Endorsed | ||||||||||
| 14 | Light composite wood-based beams and columns | Endorsed | ||||||||||
| 15 | Timber Frame Building Kits |
Endorsed |
||||||||||
| 16 | Log Building kits |
Endorsed |
||||||||||
| 17 |
Fire Stopping, Fire sealing and Fire Protective products a. Fire stopping, Fire Sealing Products
b. Fire protective products
|
Endorsed Endorsed Endorsed Finalized at EOTA level Finalized at EOTA level Endorsed Endorsed Endorsed Endorsed
|
||||||||||
| 18 | Pre-fabricated wood-based loadbearing stressed skin panels |
Endorsed |
||||||||||
| 19 |
|
|
||||||||||
| 20 |
Expansion joints for road bridges Part 1: General Part 2: Burried Expansion joints Part 3: Flexible Plug Expansion joints Part 4: Nosing Expansion joints Part 5: Mat expansion joints Part 6: Cantilever expansion joints Part 7: Supported expansion joints Part 8: Modular expansion joints |
Finalized at EOTA level Spring 2011 Spring 2011 Spring 2011 Spring 2011 Spring 2011 Spring 2011 Spring 2011 |
||||||||||
| 21 | Three-dimensional nailing plates | Endorsed | ||||||||||
| 22 |
Vetures (prefabricated) insulation Kits and Cladding Kits
|
Endorsed Finalized at EOTA level Finalized at EOTA level on hold |
||||||||||
| 23 | Falling Rock Protection Kits | Endorsed | ||||||||||
| 24 | Prefabricated Building Units | Endorsed | ||||||||||
| 25 | Liquid Applied Bridgedeck Waterproof Systems | Endorsed | ||||||||||
| 26 |
Concrete and Metal Frame Building Kits a. Concrete Frame Building Kits b. Metal Frame Building Kits |
Endorsed Endorsed |
||||||||||
| 27 |
Cold Storage Rooms and Building Kits a. Kits for prefabricated Cold Storage Rooms b. Kits for prefabricated Cold Storage Buildings |
Endorsed Endorsed |
||||||||||
| 28 | Dowels for Structural Joints | April 2006 | ||||||||||
| 29 |
Watertight coverings for bathroom walls and floors
|
Endorsed Endorsed Endorsed
|
||||||||||
| 30 | Ultra Thin Layer Asphalt Concrete | Endorsed | ||||||||||
| 31 |
Inverted Roof Kits Part 1: General Part 2: Rendered Insulation Products for Inverted Roofs |
Endorsed Endorsed |
||||||||||
| 32 | Fire Retardant Products | Finalized at EOTA level | ||||||||||
Endorsed ETAG'S
|
The Official version is in English and held on this EOTA website. Other language versions maybe hotlinks to websites in other organisations ie members of EOTA. A cross (X) indicates that the ETAG is only available in printed form (to obtain, please consult the relevant Spokesman Body in the EOTA Member List.) For common terms used in ETAGs, see the document "Common terms used in Guidelines for ETAs"
|
|||||||||||||||||||
| ETAG Number | ETAG Title |
Date of EC endorsement |
End of coexistence period |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|||
|
ETAG 001 amended |
Metal Anchors for Use in Concrete Part 1: General |
5 March 2007 | X | ||||||||||||||||
|
ETAG 001 amended |
Metal Anchors for Use in Concrete Part 2: Torque-Controlled Expansion Anchors |
5 March 2007 | X | ||||||||||||||||
|
ETAG 001 amended |
Metal Anchors for Use in Concrete Part 3: Undercut Anchors |
27 September 2010 | |||||||||||||||||
|
ETAG 001 amended |
Metal Anchors for Use in Concrete Part 4: Deformation-Controlled Expansion Anchors |
5 March 2007 | X | ||||||||||||||||
| ETAG 001 2nd amendment |
Metal Anchors for Use in Concrete Part 5 |
1 February 2008 | X | ||||||||||||||||
|
ETAG 001 amended |
Metal Anchors for Use in Concrete Annex A Annex B |
5 March 2007 |
PDF |
PDF |
|||||||||||||||
|
ETAG 001 amended |
Metal Anchors for Use in Concrete Annex C |
27 September 2010 | |||||||||||||||||
|
ETAG 001 amended |
Metal Anchors for Use in Concrete Part 6 : Anchors for multiple use for non-structural applications |
18 April 2011 | |||||||||||||||||
| ETAG 002 |
Structural Sealant Glazing Systems Part 1 |
24 Sept. 1998 | June 2003 | LINK | LINK | X | |||||||||||||
| ETAG 002 |
Structural Sealant Glazing Systems Part 2 : Coated Aluminium Systems |
16 Jan. 2002 | 16 Oct. 2004 | LINK | X | X | |||||||||||||
| ETAG 002 |
Structural Sealant Glazing Systems Part 3 : Systems incorporating profiles with thermal barrier |
25 May 2002 | February 2005 | X | X | X | |||||||||||||
| ETAG 003 | Internal Partition Kits | 5 Feb. 1999 | March 2004 | LINK | LINK | X | X | ||||||||||||
| ETAG 004 | External Thermal Insulation Composite Systems with Rendering | 11 August 2000 | May 2003 | LINK | X | ||||||||||||||
| ETAG 005 | Liquid Applied Roof Waterproofing Kits | 11 August 2000 | May 2003 |
PDF |
PDF |
LINK | X | X |
PDF |
||||||||||
| ETAG 006 | Systems of Mechanically Fastened Flexible Roof Waterproofing Membranes | 11 August 2000 | May 2003 |
PDF |
LINK | X | |||||||||||||
| ETAG 007 | Timber Frame Building Kits | 24 August 2001 | May 2004 | LINK | LINK | X | |||||||||||||
| ETAG 008 | Prefabricated Stair Kits | 16 Jan. 2002 | 16 Oct. 2004 | X | |||||||||||||||
| ETAG 009 | Non load-bearing permanent shuttering kits/systems based on hollow blocks or panels of insulating materials and sometimes concrete | 25 May 2002 | February 2005 | LINK | X | ||||||||||||||
| ETAG 010 | Self Supporting Translucent roof Kits | 24 Sept 2002 | August 2006 | X | |||||||||||||||
| ETAG 011 | Light Composite Wood-based Beams and Columns | 16 Jan. 2002 | 16 Oct. 2004 | LINK | X | ||||||||||||||
| ETAG 012 | Log Building Kits | 25 May 2002 | February 2005 | X | |||||||||||||||
| ETAG 013 | Post Tensioning Kits for prestressing of Structures | 25 May 2002 | February 2005 | X | |||||||||||||||
| ETAG 014 | Plastic Anchors for ETICS | 15 March 2011 | X | ||||||||||||||||
| ETAG 015 | Three Dimensional Nailing Plates | 24 Sept 2002 | August 2007 | X | |||||||||||||||
| ETAG 016 |
Composite Light Weight Panels Part 1 |
9 Feb 2004 | November 2006 | LINK | X | X | |||||||||||||
| ETAG 016 |
Composite Light Weight Panels Part 2 |
17 Feb 2004 | November 2006 | X | X | ||||||||||||||
| ETAG 016 |
Composite Light Weight Panels Part 3 |
2 March 2004 | December 2007 | X | |||||||||||||||
| ETAG 016 |
Composite Light Weight Panels Part 4 |
2 March 2004 | December 2007 | X | |||||||||||||||
| ETAG 017 | Veture Kits | 16 Jan 2005 | September 2008 | X | |||||||||||||||
| ETAG 018 |
Fire protective products Part 1: General |
21 Sept 2004 | June 2007 | X | |||||||||||||||
| ETAG 018 |
Fire protective products Part 2: Reactive Coatings for Fire Protection of Steel Elements |
17 July 2006 | April 2009 | X | |||||||||||||||
| ETAG 018 |
Fire protective products Part 3: Renderings and Rendering Kits intended for Fire Resisting Applications |
3 March 2006 | November 2008 | X | |||||||||||||||
| ETAG 018 |
Fire protective products part 4: Fire protective board, slab and mat products and kits |
21 Sept 2004 | June 2007 | X | |||||||||||||||
| ETAG 019 | Pre-fabricated wood-based loadbearing stressed skin panels | 25 Jan 2005 | November 2007 | ||||||||||||||||
| ETAG 020 |
Plastic Anchors, Part 1: General Part 2: for use in normal weight concrete Part 3: for use in solid masonry materials Part 4: for use in hollow or perforated masonry Part 5: for use in autoclaved aerated concrete and Annexes A B and C |
17 July 2006 | April 2009 |
|
X X X X X X X X |
|
|||||||||||||
| ETAG 021 |
Cold Storage Premises kits Part 1: Cold Storage Room Kits Part 2: Cold Storage Building Envelope and Building Kits Annexes Part 1 |
16 Nov 2005 | August 2008 |
|
|
||||||||||||||
| ETAG 022 |
Watertight covering kits for wet room floors and or walls Part 1: Liquid Applied Coverings with or without wearing surface Part 2: Kits based on flexible sheets Part 3: Kits based on inherently watertight boards |
20 July 2007 15 March 2011 15 March 2011 |
- |
|
|
X |
|
||||||||||||
| ETAG 022 |
Watertight covering kits for wet room floors and or walls Annex A Annex B Annex C Annex D Annex E Annex F Annex G Annex H Annex I |
24/05/2005 24/05/2005 24/05/2005 22/03/2005 24/11/2005 07/10/2005 24/05/2005 16/10/2006 15/03/2011 |
- |
PDF PDF PDF PDF PDF PDF PDF PDF |
|
|
|||||||||||||
| ETAG 023 | Prefabricated Building Units | 19 Sep 2006 | - | ||||||||||||||||
| ETAG 024 | Concrete Frame Building Kits | 28 July 2006 | April 2009 | ||||||||||||||||
| ETAG 025 | Metal Frame Building Kits | May 2006 | |||||||||||||||||
| ETAG 026 |
Fire Stopping and Fire Sealing Products Part 1: General |
1 January 2008 | - | X | |||||||||||||||
| ETAG 026 |
Fire Stopping and Fire Sealing Products Part 2: Penetration Seals |
1 January 2008 | - | X | |||||||||||||||
| ETAG 026 |
Fire Stopping and Fire Sealing Products Part 3 : Linear Joint and Gap Seals |
1 February 2008 | - | X | |||||||||||||||
| ETAG 027 | Falling Rock Protection Kits | 1 February 2008 | - | X | |||||||||||||||
| ETAG 029 |
Metal Injection Anchors for use in Masonry Annex A Annex B Annex C |
June 2010 | - |
PDF |
|||||||||||||||
| ETAG 031 |
Inverted Roofs Insulation Kits Part 1: General Part 2: Insulation with protective Finish |
14 December 2010 | - |
|
|||||||||||||||
| ETAG 033 | Liquid applied bridge deck waterproofing kits | 25 September 2010 | - |
|
|||||||||||||||
| ETAG 035 | Ultra Thin Layer Asphalt Concrete | 12/05/2011 | - | ||||||||||||||||
|
12 August 2011 |
|||||||||||||||||||
EOTA Guidances Documents
|
EOTA Guidance Documents are stand alone EOTA documents on general issues of relevance to EOTA in general or to all EOTA Working Groups in particular.
For the time being the following are available: |
||||||||||||||||||
|
EOTA Technical Reports
ETA's with ETAG
|
 |
|||||||||||
|
||||||||||||
| 5. Kit for traffic noise reducing devices (using hollow blocks of cement bonded wood chips as permanent shuttering system) | ||||||||||||
| 6. Prefabricated compressed mineral wool boards with two layers of acrylic paints (on the external side of the product) | ||||||||||||
| 7. Lightweight sound absorbent baffle made of wood fibres (laminated particle board, for interior walls) | ||||||||||||
| 8. Sound absorbing elements for internal use, made of melamine resin foam with variable surface structure, used with or without coating | ||||||||||||
| 9. Vibration and impact noise isolation with floating floor systems. Surface mats and discrete (pads) resilient isolators as element of floating floor systems. | ||||||||||||
| 10. Bitumen on coated polystyrene granules as a dry mix for impact sound insulation, | ||||||||||||
| 11. Large-sized fibre gypsum panels used for walls of prefabricated houses. | ||||||||||||
| 12. Channel bars (cast-in steel channel bars) | ||||||||||||
| 13. Vibration and noise isolation with elastically fixed wall panels (elastomeric or composite-elastomeric materials placed between supported wall element and the structural element of the building) | ||||||||||||
| 14. Chemical anchoring kit, consisting of a polymer resin and an activator contained separately within a single cartridge. Complete mixing when extruded | ||||||||||||
| 15. Special anchors (bolt and eccentric sleeve of stainless steel) | ||||||||||||
| 16. Wall plates made of stainless steel | ||||||||||||
|
17. Kit consisting of a trap with partially mechanical closure, mounted in a non-trapped gully 17.1 Kit consisting of a trap with partially mechanical closure, mounted in a non-trapped gully ? Rev 1 |
||||||||||||
| 18. Rice husks in bulk | ||||||||||||
|
19. Rubber-based expansion anchor 19.1 Rubber-based expansion anchor ? Rev1 |
||||||||||||
| 20. Cast-in anchor bolt | ||||||||||||
| 21. Steel plate with cast-in anchor(s) | ||||||||||||
| 22. Kit of epoxy concrete / glassfibre-reinforced polyester anchors / epoxy mortar | ||||||||||||
| 23. Powder actuated fastener for the fixing of insulation material | ||||||||||||
| 24. Connection and protection devices for load-bearing pre-cast concrete piles (two products: pile joint and rock shoe) | ||||||||||||
| 25. Solid wood slab element (bridges) | ||||||||||||
| 26. Punching preventer for concrete slabs | ||||||||||||
| 27. Solid wood slab element (buildings) | ||||||||||||
| 28. Roof insulation supporting waterproofing systems | ||||||||||||
| 29. Cellulose-reinforced bitumen shingles | ||||||||||||
| 30. Stud rails and double head studs for increasing the punching capacity of flat slabs on columns | ||||||||||||
| 31. Homogenous building board for external cladding | ||||||||||||
| 32. Composite structural floor system | ||||||||||||
| 33. Internal covering system of gypsum fibre boards | ||||||||||||
| 34. Homogenous building board for internal lining | ||||||||||||
| 35. Gypsum bonded particleboard | ||||||||||||
| 36. Cavity trays | ||||||||||||
| 37. Couplings for standardised reinforcing bars | ||||||||||||
| 38. Pressboard fa鏰de claddings | ||||||||||||
| 39. Modular building panels | ||||||||||||
| 40. Fastener of external wall claddings | ||||||||||||
| 41. Microprismatic retro-reflective sheetings | ||||||||||||
| 42. Building kit made of special components of wood-based materials | ||||||||||||
| 43. Column shoes | ||||||||||||
| 44. Connector for Sandwich elements of concrete | ||||||||||||
| 45. Kit for manhole top consisting of Cover and additional rings made of plastic for different purposes | ||||||||||||
| 46. Balcony glazing system without vertical frames | ||||||||||||
| 47. Composite roof waterproofing kit | ||||||||||||
| 48. Mechanical fastening system for fixation of thermal insulation in flat or pitched roofs made of steel | ||||||||||||
| 49. Gas and watertight seals for pipes in the area of wall and floor penetrations | ||||||||||||
| 50. Ceiling/flooring elements made of wooden boards or laths, glued on the flat side | ||||||||||||
| 51. Sealing kits, profiles and strips usually made of foamed polyrethane, plastic impregnated bitumen, or butyl | ||||||||||||
| 52. Joints sealing compounds and profiles | ||||||||||||
| 53. Roof systems: large metal shells with or without thermal insulation | ||||||||||||
| 54. Chemical waste drainage system | ||||||||||||
| 55. 3D Construction Kit | ||||||||||||
| 56. Steel truss for roofs | ||||||||||||
| 57. Prefabricated roller shutter box | ||||||||||||
| 58. Vibration and noise isolation with elastically suspended ceilings | ||||||||||||
| 59. Anchor for External Thermal Insulation Composite Systems (ETICS) | ||||||||||||
| 60. Tension Rod System | ||||||||||||
| 61. Ventilation opening device with acoustic damping | ||||||||||||
| 62. Wood shavings in bulk to be used for thermal insulation | ||||||||||||
| 63. Kit for injection piles (composite steel/concrete piles) with a structural member of defined steel, dia 63,5 mm | ||||||||||||
| 64. Elastomeric bearings for the building sector of type 揵?: Profiled elastomeric bearing | ||||||||||||
| 65. Sliding bearing | ||||||||||||
| 66. Admixture for concrete recycling 揇elvo Stop 10G? | ||||||||||||
| 67. Admixture 揇elvo stop 10 G? for washing water | ||||||||||||
| 68. Rapid setting cement A, B and C | ||||||||||||
| 69. Rapid setting cement | ||||||||||||
| 70. Timber units for walls and roofs | ||||||||||||
| 71. Single point supported vertical glazing | ||||||||||||
| 72. Point fastener | ||||||||||||
| 73. Surface water repellent product, hydrofobic agents based on organo-metallic substances | ||||||||||||
| 74. Coating system eliminating electrostatic charges for facilities used for storage, filling and handling of water endangering liquids. | ||||||||||||
| 75. Coating system to be used for facilities used for storage, filling and handling of water endangering liquids. | ||||||||||||
| 76. Fire resistant glazed kits | ||||||||||||
| 77. Wood fibre insulation as boards sprayed in situ | ||||||||||||
|
78. Thermal insulating board made of mineral material 78.1 Thermal insulating board made of mineral material |
||||||||||||
| 79. Kit for pipe system consisting of outer pipe made of concrete, unreinforced or reinforced and inliner made of unplasticized polyvinylchloride (PVC ? U) which are fixed | ||||||||||||
| 80. Light composite wood based beam | ||||||||||||
| 81. Lightweight framing elements for non-ventilated sheet metal fa鏰des | ||||||||||||
| 82. External thermal insulation system based on cement-free adhesive mortar And base coat | ||||||||||||
| 83. Fire screen (A barrier to prevent the spread of fire, smoke and sparks in ventilation ducts) | ||||||||||||
| 84. Fabric connecting joints | ||||||||||||
| 85. Level-crossing systems (types A1, A2 and B) | ||||||||||||
| 86. Plastic piping kits for the transport system of cold and hot water intended for human consumption, made of PE-RT with ot without barrier layer | ||||||||||||
| 87. Double-wall cylindrical flat-bottom tank made of GRP | ||||||||||||
| 88. Spherical, double-walled tank of polymer concrete faced with GRP | ||||||||||||
| 89. Single-wall cylindrical flat-bottom tank of GRP | ||||||||||||
| 90. Concrete screw for anchorage in normal-weight concrete | ||||||||||||
| 91. Cartridge fired pin for connections for thin gauge steel members and sheeting | ||||||||||||
| 92. Steelwork connector | ||||||||||||
| 93. Buried glass reinforced filament wound(GRE)piping systems for the transport under pressure of water intended for human consumption | ||||||||||||
| 94. Buried glass reinforced filament wound (GRE) piping systems for the transport under pressure of water intended for human consumption in polluted soils | ||||||||||||
| 95. Buried glass reinforced filament wound (GRE) piping systems for the transport under pressure of water not intended for human consumption | ||||||||||||
| 96. Buried glass reinforced filament wound (GRE) piping systems for drainage and sewerage with or without pressure | ||||||||||||
| 97. Plastic piping kits for heating systems, made of PE-RT with an oxygen barrier layer | ||||||||||||
| 98. Piping made from thermoplastic materials, for the transport of chilled water | ||||||||||||
| 99. Factory made loose fill cellulose glass | ||||||||||||
| 100. Pile Pipes made of ductile iron | ||||||||||||
| 101. Thermal insulation kit for roofs intended to be assembled in situ | ||||||||||||
| 101.1(rev 1) Thermal insulation kit for roofs intended to be assembled in situ | ||||||||||||
| 102. Vibration isolation of buildings with elastomeric bearing | ||||||||||||
| 103. Roofing Underlay | ||||||||||||
| 104. Binder in Concrete and mortar | ||||||||||||
| 105. Door Treshold with build-in draining system for draining off of water | ||||||||||||
| 106. Hydraulic Binder (slag and additives) | ||||||||||||
| 107. Specialised glued laminated wood beam | ||||||||||||
| 108. Annular ringed shank nails and connector screws | ||||||||||||
|
109. Fly ash for concrete 109.1 Fly Ash for Concrete Rev 1 |
||||||||||||
| 110. Panels for acoustic and thermal insulation | ||||||||||||
| 111. Pipe penetration seal using an intumescent mat | ||||||||||||
| 112. Damper for damping vibrations, mainly in buildings | ||||||||||||
| 113. Glass concrete composite system (gccs) | ||||||||||||
| 114. Structural Sealant Glazing System | ||||||||||||
| 115. Variable Geometry Moving Axix Unsprung Concealed Hinge Assembly | ||||||||||||
| 116. Emergency Escape Bolt operated by a pull handle & frangible component | ||||||||||||
| 117. Polyurethane-bound mats made of mineral material to be used for impact sound insulation | ||||||||||||
| 118. Cement-bonded board | ||||||||||||
| 119. Metal Anchor for use in autoclaved aerated concrete | ||||||||||||
| 120. Levelling fastener system for roofs, walls and interior applications with sub-constructions made out of concrete | ||||||||||||
| 121. Levelling fastener system for roofs, walls and interior applications with wooden sub-constructions | ||||||||||||
| 122. Pre-fabricated elements made of concrete and reinforced concrete used in facilities to deal with liquid chemicals (substances hazardous to water) | ||||||||||||
| 123. Sealing system made of asphalt to seal areas, suitable as installation for discharging water-contaminating liquids over sloping to use in construction works to deal with water-contaminating substances. | ||||||||||||
| 124. Restoration system for sett paving areas | ||||||||||||
| 125. Joint sealing system glued on concrete | ||||||||||||
| 126. Surfacing material for a layer impervious to water contaminating substances | ||||||||||||
| 127. Kit of waterproofing polymeric membrane and other components for creating a waterproofing system against action of water on walls and floors of buildings under indoor and outdoor conditions | ||||||||||||
| 128. Kit of a Elastomer/Bitumen composite sheet and other components for creating a roof and construction waterproofing system | ||||||||||||
| 129. Kit of liquid applied polymer modified mineral sealing mass and other components in contact with tile coverings for creating a waterproofing system against action of water on different parts of constructions under indoor and outdoor conditions | ||||||||||||
| 130. Polypropylene foam insulating boards | ||||||||||||
| 131. Intumescent, flexible fire stopping fire sealing product based on graphite (reactive material) | ||||||||||||
| 132. Adhesive tape for structural glazing application | ||||||||||||
| 133. Natural calcined pozzolana as type II addition | ||||||||||||
| 134. Kit for pre-insulated aluminium ducts | ||||||||||||
| 135. Ceramic coating for thermal insulation | ||||||||||||
| 136. Translucent external wall insulation made of prefabricated fa鏰de panels | ||||||||||||
| 137. Kit for soil nails | ||||||||||||
| 138. Kit for rock and soil anchors | ||||||||||||
| 139. Spherical bearing with special sliding material | ||||||||||||
| 140. Floor covering on the basis of polyurethane | ||||||||||||
| 141. Thin reflective insulation product intended to be used as thermal insulation complement in the construction envelope | ||||||||||||
| 142. Spray-applied mineral wool | ||||||||||||
| 143. Dry Plate | ||||||||||||
| 144. Pipe liner for renovation of underground non-pressure sewerage networks with nominal pipe diameters from 100 mm to 1200 mm to be incorporated with a special procedure | ||||||||||||
| 145. Steel beams with special joining technology | ||||||||||||
|
146. Eastomeric bearings for the building sector Specific title of the products applied for: Type "a": Elastomeric bearing of higher hardness |
||||||||||||
| 147. Road Marking products | ||||||||||||
| 148. A kit consisting of a thermal insulation board, fabricated from expanded polystyrene (EPS) and a defined facing to be used for accessible flat roofs for pedestrian traffic applied in a roofing system | ||||||||||||
| 149. Finishing board, kit with patented click mechanism | ||||||||||||
| 150. Plastic sheets for sealing of collecting basins and collecting rooms for the storage of water-contaminating liquids (liquids hazardous to water). | ||||||||||||
| 151. Fire seals, smoke seals and combined fire and smoke seals - for fire resisting and/or smoke control door assemblies | ||||||||||||
| 152. Unplasticized poly (vinyl chloride) (PVC-U) piping system for domestic waste water discharge inside the building to a maximum discharge temperature of 75 癈. | ||||||||||||
| 153. Sheets of factory-made machine-welded fabric for cracking control in concrete elements | ||||||||||||
| 154. Soft foam insulation | ||||||||||||
| 155. Flexible coupling for gravity and pressure (below 1.5 bars) sewerage and drainage pipe | ||||||||||||
| 156. Quenched and tempered wire for prestressing, ribbed and plane | ||||||||||||
| 157. Plastic steps for underground man entry chambers | ||||||||||||
| 158. Double wall static tanks made from rotating moulded polyethylene for above ground storage of domestic heating oils and diesel fuels | ||||||||||||
| 159. Precast concrete products ? Beams made of prestressed steel fibre concrete | ||||||||||||
| 160. HRC T-headed reinforcement steel bar | ||||||||||||
| 161. Special cement CEM III/A with high sulfate resistance | ||||||||||||
| 162. Glass-crystallic Cladding plates | ||||||||||||
| 163. Self-Adhesive Glass mesh Tape | ||||||||||||
| 164. Highly densified EPS as a load bearing and thermal insulating element | ||||||||||||
| 165. Insulation product made of expanded perlite (EPB) | ||||||||||||
| 166. Composite cement (clinker, blast furnace slag, natural puzzolana) class 32,5 N-LH with high sulfate resistance | ||||||||||||
| 167. Wood & Metal composite lighting columns | ||||||||||||
| 168. Sauna Stove fired by wood | ||||||||||||
| 169. Polyestyer fibre thermal & Acoustic insulation | ||||||||||||
| 170. Timber Frame Kit | ||||||||||||
| 171. Kit Composed by sub frame and fixings for fastening cladding elements and also external wall elements, made of stone and ceramics | ||||||||||||
| 172. A packaged small domestic waste water treatment plant for up to 50 PT, made of rotationally moulded PE for use underground and subjected to traffic loads | ||||||||||||
| 173. Compostion toilet | ||||||||||||
| 174. With bricks coated external insulation system | ||||||||||||
| 175. Boards made of natural agglomerated cork for thermal and acoustic insulation | ||||||||||||
| 176. Bitumen shingles with mineral or synthetic reinforcement | ||||||||||||
| 177. Laminated bitumen shingles with mineral or synthetic reinforcement | ||||||||||||
| 178. Fiberboard for wall and roof constructions, vapour open | ||||||||||||
| 179. Floor panel with a polyurethane surface | ||||||||||||
| 180. Profiled steel sheeting for floor systems in combination with a ribbed reinforced concrete slab | ||||||||||||
| 181. Punched metal plate fasteners | ||||||||||||
| 182. Welded gabion products | ||||||||||||
| 183. Pool Safety Cover | ||||||||||||
| 184. Prefabricated cable pits in reinforced concrete | ||||||||||||
| 185. Prefabricated cable pits made of polystyrene (ps) recycled | ||||||||||||
| 186. Calcium carbonate fines as additions for concrete with binding properties similar to additions type II. | ||||||||||||
| 187. Masonry Spacer Mat | ||||||||||||
| 188. Roof insulation supporting roofing tiles | ||||||||||||
| 189. One component bitumen-polyurethane resin for flashing application applied directly to bitumen waterproofing membrane used in the horizontal part of the roof | ||||||||||||
| 190. Remedial Damp-proof course | ||||||||||||
| 191. Powered pedestrian door drives and systems | ||||||||||||
| 192. Sandwich boards composed by three layers, respectively of agglomerated cork, coconut fibres and fibreboard MDF | ||||||||||||
| 193. Agglomerated cork and grain recycled rubber with polyurethane binder | ||||||||||||
| 194. Agglomerated cork with polyurethane binder | ||||||||||||
| 195. Mortar with insulating components for floor-decks | ||||||||||||
| 196. Cast-in anchor with internal threaded socket | ||||||||||||
| 197. Fastening screw for metal sheet roof covering | ||||||||||||
| 198. Fabricated fittings manufactured by heat moulding (thermo moulding) from an extruded unplasticized poly(vinyl chloride) (PVC-U) pipe with an intermediate layer of PVC-U foam, to be used with PVC-U pipes for non-pressure drainage and sewerage buried in the ground. | ||||||||||||
| 199. Swivel joints manufactured by heat moulding (thermo moulding) from an extruded unplasticized poly(vinyl chloride) (PVC-U) pipe, with a free angle of deflection to a maximum of 30 ? to increase the flexibility of fittings, such as brands, couplers and saddles, in buried non-pressure and sewage applications | ||||||||||||
| 200. Copper plumbing tube with polyethylene covering for sanitary and heating applications | ||||||||||||
| 201. Kit for closure system for conveyors systems | ||||||||||||
| 202. Insulation material made of granulated polystyrene and compound | ||||||||||||
| 202.1 (Rev1) Insulation material made of granulated polystyrene and compound | ||||||||||||
| 204. Glazing guardrail kit | ||||||||||||
| 205. PVC sheet for leak protecting linings | ||||||||||||
| 206. Thermomechanically rolled long steel products made of weldable fine grain structural steel of special steel grades | ||||||||||||
| 207. Structural sealant glazing on wood frame | ||||||||||||
| 208. External Thermal Insulation Composite System faced with clinker brick | ||||||||||||
| 209. Semi-flexible pavement/floor topping | ||||||||||||
| 210. Ventilated fa鏰de system with self-supporting composite panels. | ||||||||||||
| 211. Mechanical Anchorages for Reinforcing Bars | ||||||||||||
| 212. Reinforcing Bars with Threaded Ribs | ||||||||||||
| 213. Hot rolled products of structural steels | ||||||||||||
| 214. Plastics piping kits for the transport system of hot and cold water, intended for human consumption, made of glass reinforced polypropylene | ||||||||||||
| 215. Plastics piping kits for heating systems, made of glass-reinforced polypropylene | ||||||||||||
| 216. Plastics piping kits to be used in fixed fire fighting systems, made of glass-reinforced polypropylene | ||||||||||||
| 217. Light weight cementitious screed | ||||||||||||
| 218. Modular tiles of natural stone including snap-on connection and polyurethane layer | ||||||||||||
| 219. Factory-made boards and products formed by moulding of a silicate polystryrene composite for the thermal and/or acoustical insulation | ||||||||||||
| 220. An anchor device designed to be fully bonded to a multi layered modified bitumen roof waterproofing system provided with a polyester reinforcement , to form a structural anchor without perforating the roof waterproofing system, intended to connect a personal fall protection system | ||||||||||||
| 221. Bolted glazing kit | ||||||||||||
| 222. Wood-concrete composite slab | ||||||||||||
| 223. Light weight floor system | ||||||||||||
| 224. Integrated facade kits with active and/or passive solar elements (IFK-SRE) | ||||||||||||
| 225. Concrete Protection Linings of Collecting Basins/Rooms for Liquids Hazardous to Water | ||||||||||||
| 226. Sealing Kit for Filling Areas of Petrol Stations | ||||||||||||
| 227. Reinforcing Kit with Carbon Fibre Laminates for the Strengthening of Beams and Plates of reinforced and Prestressed Concrete | ||||||||||||
| 228. Light composite wood-based beam | ||||||||||||
| 229. Liquid applied roof waterproofing kits based on block co-polymer elastomeric, 100% synthetic rubber | ||||||||||||
| 230. Kit for reinforced concrete members subject to compressive loading | ||||||||||||
| 231. Sand Bentonite Polymer Gel(SBPG) for application as a sealing barrier or as a component of a sealing barrier system | ||||||||||||
| 232. Sump pallets made of steel | ||||||||||||
| 233. Connections for precast concrete columns and beams | ||||||||||||
| 234. Connection Units for Concrete staircases and slabs | ||||||||||||
| 235. Type I addition for concrete | ||||||||||||
| 236. Type II addition for concrete | ||||||||||||
| 237. Chimney kit with clay flue liner | ||||||||||||
| 238. Prefabricated wall elements of bonded clay masonry unit | ||||||||||||
| 239. Kit for bonding of clay masonry units on site | ||||||||||||
| 240. Permanent shuttering for floors | ||||||||||||
| 241. Floor insulation based on polystyrene light weight concrete | ||||||||||||
| 242. Precast concrete products-Wall elements of steel fibre concrete | ||||||||||||
| 243. Structural composite lumber products: Laminated Strand Lumber (LSL) and Parallel Strand Lumber (PSL) | ||||||||||||
|
244. Road marking materials ? retroreflective elements with refractive index 1.9 Road marking materials ? retroreflective elements with refractive index 2.4 |
||||||||||||
| 245. Structural Sealant Glazing Kit as infill element for fa鏰de contructions | ||||||||||||
| 246. Suppression mode early suppression, fast response automatic sprinkler | ||||||||||||
| 247. Insulated glass unit punctually anchored | ||||||||||||
| 248. Glued laminated timber beam with 2 or more waney lamellas | ||||||||||||
| 249. Modified Fly Ash for concrete | ||||||||||||
| 250. Special drawn sheet glass | ||||||||||||
| 251. Kit for non-loadbearing internal and external walls made of glass blocks | ||||||||||||
| 252. Wooden shingles | ||||||||||||
| 253. Parapet made of glass with failure protection | ||||||||||||
| 254. In situ sprayed polyurethane foam for sealing joints, filling cavities and for fixing construction elements | ||||||||||||
| 255. Mortars based on sulphur | ||||||||||||
| 256. Sulphur concrete elements | ||||||||||||
| 257. Fibres for concrete : metallic amorphous fibres | ||||||||||||
| 258. Factory made masonry units of cement bonded wood chips | ||||||||||||
| 259. Prefabricated timber framed load-bearing wall elements | ||||||||||||
| 260. Box Beam with perforated, inclined webs | ||||||||||||
| 261. Expanding structural bolting assemblies for blind fastening of steel components | ||||||||||||
| 262. Steel mesh for retaining of unstable slopes by controlling and preventing rockfalls and loose debris flow along highways roads, and railways | ||||||||||||
| 263. Cable Net Systems | ||||||||||||
| 264. Wire Rope Loop System to Connect Precast Concrete Components | ||||||||||||
| 265. Plastic Anchor for Use in Concrete | ||||||||||||
| 266. Powder Actuated Fastener for Multiple Use in Concrete for Non-structural Applications | ||||||||||||
| 267. Coating System for Inside Use of Tanks Made of Steel for the Storage of Liquids Hazardous to Water | ||||||||||||
| 268. Light Weight Roof System | ||||||||||||
| 269. EPI adhesives | ||||||||||||
| 270. Calcined layer silicate based type II addition | ||||||||||||
| 271. Sedimentation reducing concrete admixture | ||||||||||||
| 272. Roof and wall systems with hidden fastenings | ||||||||||||
| 273. Flat aluminium products made of aluminium alloy EN-AW-5059 | ||||||||||||
| 274. Corrugated bitumen tiles | ||||||||||||
| 275. Large span load-bearing sandwich panels for roofing | ||||||||||||
| 276. Reinforced tape for assembled gypsum platerboards | ||||||||||||
| 277. Prefabricated Small Wastewater Treatment Plants | ||||||||||||
| 278. Insulation Product made of Wood Shavings, Inorganic Cementing Agent and water | ||||||||||||
| 279. Thermal insulation board made of expanded polystyrene (EPS) and cement | ||||||||||||
| 280. Expanded polystyrene (EPS) insulating blocks | ||||||||||||
| 281. Polymeric concrete addition | ||||||||||||
| 282. Load bearing thermal insulation elements which form a thermal break between balconies and internal floors | ||||||||||||
| 283. Powder-coating system for structural steel components without previously galvanizing | ||||||||||||
| 284. Solid wood slab element ? element of dowel jointed timber boards to be used as a structural element in buildings | ||||||||||||
| 285. Prefabricated wood slab element made of mechanically jointed square-sawn timber members to be used as a structural element in buildings | ||||||||||||
| 286. Rubber fibre mat to be used for impact sound insulation | ||||||||||||
| 287. Prefabricated steel and stainless steel wire ropes with end connector | ||||||||||||
| 288. Self-tapping screws for use in timber construction | ||||||||||||
| 289. Extended Coverage Control Mode Automatic Sprinkler | ||||||||||||
| 290. Suspended ceiling kits for use in exterior applications | ||||||||||||
| 291. Terrace decking kit | ||||||||||||
| 292. Processed blend of main constituents according to EN 197-1, without clinker, as a type II addition for concrete | ||||||||||||
| 293. Corrugated plastic ducts | ||||||||||||
| 294. Welded gabion products | ||||||||||||
| 295. Spacer system for site assembled double skin metal roof and wall cladding. | ||||||||||||
| 296. Fastening Screws for Sandwich Panels | ||||||||||||
| 297. Thermal insulation roof kit for metal or flexible roof coverings | ||||||||||||
| 298. Roof slates | ||||||||||||
| 299. Kit for prestressed flat slabs with steel fibre reinforced concrete | ||||||||||||
| 300. Low shrinkage calcium sulphoaluminate cement | ||||||||||||
| 301. Insulating Glass Units Production with Heat Mirror Film | ||||||||||||
| 302. Mineral pre-coated ceiling panels | ||||||||||||
| 303. Self-adhesive Anti-slip Covering for Floorings | ||||||||||||
| 304. Liquid Applied Water Vapour Control Layers | ||||||||||||
| 305. Factory made vacuum insulation panel (VIP) | ||||||||||||
| 306. Granulated polystyrene for core thermal insulation of cavity walls (two-leaf masonry walls) | ||||||||||||
| 307. Cement ? bonded insulating board made of wood chips | ||||||||||||
| 308. Heat Mirror | ||||||||||||
| 309. Kits for green roofs | ||||||||||||
| 310. Thin walled steel flat products predominantly for roofing and cladding with organic coil-coating system | ||||||||||||
| 311. Steel corrugated culverts | ||||||||||||
| 312. A Rubber/Bitumen Liquid Applied® Bridge Deck System | ||||||||||||
| 313. Floor void former | ||||||||||||
| 314. Surface maintenance treatment for highways | ||||||||||||
| 315. Surface repair treatment for highways | ||||||||||||
| 316. Rapid Hardening Calcium Sulphoaluminate based Cement | ||||||||||||
| 317. Kit for prestressed flat slabs with steel fibre reinforced concrete | ||||||||||||
| 318. Kit of concrete columns and prefabricated bracing light-weight concrete infill | ||||||||||||
| 319. Plantable coverings made of welded steel grids for slope stabilisation systems | ||||||||||||
| 320. Welded soil boxes | ||||||||||||
| 321. Cast or spray applied hemp/lime kit for internal and external wall construction | ||||||||||||
| 322. Kit consisting of chimney flue liner and ancillaries | ||||||||||||
| 323. Composite boards made of agglomerated cork and grain recycled rubber for acoustic and thermal insulation | ||||||||||||
| 324. Hydraulic filling material for large underground volumes | ||||||||||||
| 325. Radon detector device | ||||||||||||
| 326. Finger Jointed green wood for structural application | ||||||||||||
| 327. Load Bearing timber framed wall panels | ||||||||||||
| 328. Steel framed membrane building kit | ||||||||||||
| 329. Reaction resin mortar for joints between concrete elements | ||||||||||||
| 330. Roof covering kit using in-situ sprayed polyurethane foam | ||||||||||||
| 331. Glued laminated timber with high-strength lamellas and special longitudinal joints | ||||||||||||
| 332. Granulated polystyrene foam with binding agent as non-load bearing thermal insulation | ||||||||||||
| 333. Plastics piping kits for heating systems, made of multilayer composite pipes and compression fittings | ||||||||||||
| 334. Plastics piping kits for heating systems made of crosslinked medium density polyethylene (PE-MDX) | ||||||||||||
| 335. Plastics piping kits for heating systems, consisting of pipes made of PB-R and mechanical and/or welded fittings | ||||||||||||
| 336. Plastics piping kits for heating systems, consisting of pipes made of PB-H Type II and mechanical and/or welded fittings | ||||||||||||
| 337. Light gauge secondary structures | ||||||||||||
| 338. Metal Frame self-storage system | ||||||||||||
| 339. Alkali resistant glass fibres containig zirconium dioxide for the use in concrete | ||||||||||||
| 340. Spun columns with reinforcement areas of longitudinal reinforcement higher than 8% up to 16% of the area of the concrete section | ||||||||||||
| 341. LAMI Glass fibre reinforced polyester doors (LAMI GTP doors) | ||||||||||||
| 342. Hot rolled products and structural components made of steel grades Q325B, Q235D,Q345B and Q345D | ||||||||||||
| 343. Glass-fibre reinforced plastic bar used as reinforcing bar of concrete | ||||||||||||
| 344. Kit consisting of chimney flue liner, made of glass fibres, mineral and organic substances and ancillaries | ||||||||||||
| 345. Strength graded finger jointed structural timber ? solid, tension proof loaded, structural timber beams and, used as laminations, flatwise laminated beams with up to 4 laminations | ||||||||||||
| 346. Flexible plug expansion joint for road bridges | ||||||||||||
| 347. Mechanical splice for reinforcing steel bars | ||||||||||||
| 348. Ventilation ducts made from insulation boards | ||||||||||||
| 349. Kit for system stove-chimneys with clay/ceramic flue liner and integrated stove | ||||||||||||
| 350. Structural glazing system mechanically supported with fix points | ||||||||||||
| 351. Structural glazing system mechanically supported with holders | ||||||||||||
| 352. Roof Hatches, Floor, Wall and Ceiling Doors providing access or for use as an emergency door / with or without fire resistance | ||||||||||||
| 353. Blind rivets for metal members and sheeting | ||||||||||||
| 354. Vacuum insulation panel (VIP) with factory apllied protection layers | ||||||||||||
| 355. Lift control pot bearing | ||||||||||||
| 356. Load bearing external wall kit | ||||||||||||
| 357. Kit for load bearing masonry subject to seismic actions | ||||||||||||
| 358. Internal wall-and floor- covering made of coconut shells | ||||||||||||
| 359. Sealing device for waterproofing form tie holes, holes or cast-in pipes in concrete casting and masonry walls | ||||||||||||
| 360. Liquid applied roof waterproofing kit based on a rubbersolution | ||||||||||||
| 361. Early Suppression, Fast Response (ESFR), K240 to K360, Upright and Pendent Automatic Fire Sprinklers | ||||||||||||
| 362. Polyester fibre mat with embedded silica aerogel | ||||||||||||
| 363. Steel Lighting columns | ||||||||||||
| 364. Strength graded structural timber - square edged logs with wane | ||||||||||||
| 365. Monolithic or laminated beam and wall logs made of timber | ||||||||||||
| 366. Kit for friction pipe anchors | ||||||||||||
| 367. Fire resistant access panel for installation in walls or ceiling | ||||||||||||
| 368. Plastics piping kits as a transport system of hot and cold water, intended for human consumption, consisting of pipes made from PB-H Type II and mechanical and/or welded fittings | ||||||||||||
| 369. Fireplaces Fired by Solid Fuel ? Operated Independent of the Room Air | ||||||||||||
| 370. Low lambda composite board for internal use | ||||||||||||
| 371. Columns of glued laminated timber with 2 to 4 lamellas for timber frames for buildings | ||||||||||||
| 372. Reconstituted stones for wall cladding | ||||||||||||
| 373. Load bearing thermal insulation base tub of expanded polystyrene (EPS) | ||||||||||||
| 374. Sun Tunnel | ||||||||||||
| 375. Flexible plug expansion joint for railway bridges | ||||||||||||
| 376. Prefabricated elements for sea wall protection | ||||||||||||
| 377. Stay Cable system | ||||||||||||
| 378. With sprinkler kit fire protected steel structures | ||||||||||||
| 379. Prefabricated building units based on glass fibre reinforced polyester (GRP) structural components mounted on a steel grill floor | ||||||||||||
| 380. Premix for ultra High Performance Fibre-Reinforced Concrete/Mortar | ||||||||||||
| 381. Kit for roofing systems made of polyler slates and ancilleray products | ||||||||||||
| 382. Board made of change phase material | ||||||||||||
| 383. Fiber-reinforced composite connectors anchored in concrete | ||||||||||||
| 384. Pre-formed drywall lining accessories | ||||||||||||
| 385. Carbon fibre reinforced polymer composite laminate for the strengthening of structures | ||||||||||||
| 386. Multimaterial composite slab to be used in building kits | ||||||||||||
| 387. Snow Stopper for Roof | ||||||||||||
| 388. Kit for ventilation system with heat recovery | ||||||||||||
| 389. Structural steel piles with hollow sections and rigid splices | ||||||||||||
| 390. Kits for external wall cladding systems with exterior continuous finishes applied in situ for ventilated and non-ventilated façades | ||||||||||||
| 391. Reinforced concrete sandwich element with embedded cylinders in thermoplastic polymer for translucent wall elements | ||||||||||||
| 392. Sandwich panels made from a polyurethane core with magnesium oxide/magnesium chloride facings on both sides | ||||||||||||
| 393. Hot finished structural hollow sections of non-alloy and fine grain steels with enhanced fire resistance performance | ||||||||||||
| 394. Modular construction system | ||||||||||||
| 395. Plastic sheets made of polyethylene for the lining of collecting basins and collecting rooms for the storage of liquids hazardous to water | ||||||||||||
| 396. Factory-made boards and products formed by moulding of an expanded polylactic acid (E-PLA) for thermal and/ or acoustical insulation | ||||||||||||
| 397. Spherical or cylindrical bearing with special friction material | ||||||||||||
| 398. Alga Sferon Hotslide Spherical Bearings | ||||||||||||
| 399. Portland-pozzolanic cement for use in tropical conditions | ||||||||||||
| 400. Elastic micro hollow spheres as concrete admixture | ||||||||||||
| 401. Substructure kit for heated buildings. | ||||||||||||
| 402. Kits for bridging expansion joints with and without sealing function for trafficked and non-trafficked areas of buildings | ||||||||||||
| 403. Waste water pipe renovation with inner coating of glass-fibre reinforced polyester compound, for use inside and outside buildings | ||||||||||||
| 404. Plastics piping kits as a transport system of hot and cold water, made from cross linked medium density polyethylene (PE-MDX) | ||||||||||||
| 405. Dowel-type fasteners with resin coating | ||||||||||||
| 406. Constant Force Post Anchor Device, Single Point Anchor Device, Horizontal Cable Anchor Device and Single Span Overhead Horizontal Cable Anchor Device | ||||||||||||
| 407. Eccentric anchored sheet piles | ||||||||||||
| 408. Concrete element kit for building services | ||||||||||||
| 409. Pot bearing with special sealing | ||||||||||||
| 410. Timber Structures – Glued-in rods for timber connexions | ||||||||||||
| 411. Hard gypsum plasterboards for load bearing applications | ||||||||||||
| 412. Self supporting light weight insulation panels | ||||||||||||
| 413. After treatment system for the effluent of small wastewater treatment systems - disinfection | ||||||||||||
| 414. Thermal break made of cellular glass for structural and non structural masonry walls | ||||||||||||
| 415. Zinga Anti-Corrosion Paint for Steel | ||||||||||||
|
416. Kit for non load-bearing mineral board external wall systems WHEN IS AN ETA NOT AN ETA? When looking for an anchor with a European Technical Approval (ETA), a specifier should be careful to ensure that the product actually has been awarded an ETA. The use of an “ETA logo” (there is no formal ETA logo) or the inclusion of the initials “ETA” in the company or product name does not mean that an approval has been awarded. Firstly, the specifier should look for the approval number, this will be in the format: “ETA – 05/1234”. The first two digits indicate the year the approval was first awarded (it may have been amended since) and the last four digits indicate the approval number within that year. If you want to check the validity of an ETA, including its validity dates, log on to www.eota.be and click on “Issued ETAs” where all ETAs are listed with a brief description of the product. |
What is CE Maring?
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
* Not normally required under ETA route since Initial Type Testing is already dealt with as a part of the assessment for ETA |
中文版
ENGLISH
