2006/42/EC新指令Annex IV中规定的23类危险机械
|
|
|
Annex IV 附录四- 必须向欧盟授权机构Notified body申请认证的机械种类
|
1
|
Circular saws (single- or multi-blade) for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics, of the following types:
|
1.1
|
sawing machinery with fixed blade(s) during cutting, having a fixed bed or support with manual feed of the workpiece or with a demountable power feed;
|
1.2
|
sawing machinery with fixed blade(s) during cutting, having a manually operated reciprocating saw-bench or carriage;
|
1.3
|
sawing machinery with fixed blade(s) during cutting, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading;
|
1.4
|
sawing machinery with movable blade(s) during cutting, having mechanical movement of the blade, with manual loading and/or unloading.
|
2
|
Hand-fed surface planing machinery for woodworking.
|
3
|
Thicknessers for one-side dressing having a built-in mechanical feed device, with manual loading and/or unloading for woodworking.
|
4
|
Band-saws with manual loading and/or unloading for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics, of the following types:
|
4.1
|
sawing machinery with fixed blade(s) during cutting, having a fixed or reciprocating-movement bed or support for the workpiece;
|
4.2
|
Sawing machinery with blade(s) assembled on a carriage with reciprocating motion.
|
5
|
Combined machinery of the types referred to in points 1 to 4 and in point 7 for working with wood and material with similar physical characteristics.
|
6
|
Hand-fed tenoning machinery with several tool holders for woodworking.
|
7
|
Hand-fed vertical spindle moulding machinery for working with wood and material with similar physical characteristics.
|
8
|
Portable chainsaws for woodworking.
|
9
|
Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s.
|
10
|
Injection or compression plastics-moulding machinery with manual loading or unloading.
|
11
|
Injection or compression rubber-moulding machinery with manual loading or unloading.
|
12
|
Machinery for underground working of the following types:
|
12.1
|
locomotives and brake-vans;
|
12.2
|
hydraulic-powered roof supports.
|
13
|
Manually loaded trucks for the collection of household refuse incorporating a compression mechanism.
|
14
|
Removable mechanical transmission devices including their guards.
|
15
|
Guards for removable mechanical transmission devices.
|
16
|
Vehicle servicing lifts.
|
17
|
Devices for the lifting of persons or of persons and goods involving a hazard of falling from a vertical height of more than three metres.
|
18
|
Portable cartridge-operated fixing and other impact machinery.
|
19
|
Protective devices designed to detect the presence of persons.
|
20
|
Power-operated interlocking movable guards designed to be used as safeguards in machinery referred to in points 9, 10 and 11.
|
21
|
Logic units to ensure safety functions.
|
22
|
Roll-over protective structures (ROPS).
|
23
|
Falling-object protective structures (FOPS).
|
2006/42/EC Annex V 附录五中规定的17种安全部件(强制性需要向欧盟授权机构申请认证)
|
|
|
Annex V Indicative list of the safety components referred to in Article 2(c)
|
1
|
Guards for removable mechanical transmission devices.
|
2
|
Protective devices designed to detect the presence of persons.
|
3
|
Power-operated interlocking movable guards designed to be used as safeguards in machinery referred to in items 9, 10 and 11 of Annex IV.
|
4
|
Logic units to ensure safety functions.
|
5
|
Valves with additional means for failure detection intended for the control of dangerous movements on machinery.
|
6
|
Extraction systems for machinery emissions.
|
7
|
Guards and protective devices designed to protect persons against moving parts involved in the process on the machinery.
|
8
|
Monitoring devices for loading and movement control in lifting machinery.
|
9
|
Restraint systems to keep persons on their seats.
|
10
|
Emergency stop devices.
|
11
|
Discharging systems to prevent the build-up of potentially dangerous electrostatic charges.
|
12
|
Energy limiters and relief devices referred to in sections 1.5.7, 3.4.7 and 4.1.2.6 of Annex I.
|
13
|
Systems and devices to reduce the emission of noise and vibrations.
|
14
|
Roll-over protective structures (ROPS).
|
15
|
Falling-object protective structures (FOPS).
|
16
|
Two-hand control devices.
|
17
|
Components for machinery designed for lifting and/or lowering persons between different landings and included in the following list:
(a) devices for locking landing doors;
(b) Devices to prevent the load-carrying unit from falling or unchecked upwards movement;
(c) Overspend limitation devices;
(d) Energy-accumulating schock absorbers;
- non-linear, or
- with damping of the return movement;
(e) energy-dissipating shock absorbers;
(f) safety devices fitted to jacks of hydraulic power circuits where these are used as devices to prevent falls;
(g) Electric safety devices in the form of safety switch containing electronic components.
|