服务范围

机械指令涉及的产品及标准清单

出处	调和标准标题
EN 81-3:2000	Safety rules for the construction and installation of lifts ─ Part 3: Electric and hydraulic service lifts 升降机施工与安装之安全规则第3部分：电动/液压升降机
EN 115:1995	Safety rules for the construction and installation of escalators and passenger conveyors 自动电梯与乘客用输送带的制造与安装之安全规则
EN 115/A1:1998	Safety rules for the construction and installation of escalators and passenger conveyors ─ Amendment 1 自动电梯与乘客用输送带的制造与安装之安全规则 (修正版1)
EN 201:1997	Rubber and plastics machines ─ Injection moulding machines ─ Safety requirements 橡胶/塑料射出成型机：安全要求
EN 201/A1:2000	Rubber and plastics machines ─ Injection moulding machines ─ Safety requirements (Amendment 1) 橡胶/塑料射出成型机：安全要求(修正版1)
EN 280:2001	Mobile elevating work platforms ─ Design calculations, stability criteria, construction ─ Safety, examinations and tests 移动式升降工作平台：设计计算、稳定标准、结构 — 安全、检查与测试
EN 289:1993	Rubber and plastics machinery ─ Compression and transfer moulding presses ─ Safety requirements for the design 橡胶/塑料机械：压缩与转移造型机 — 设计之安全要求
EN 292-1:1991	Safety of machinery ─ Basic concepts, general principles for design Part 1: Basic terminology, methodology 机械安全：基础概念、一般设计原则第1部分：基础用语、方法

EN 292-2:1991	Safety of machinery ─ Basic concepts, general principles for design Part 2: Technical principles and specifications 机械安全：基础概念、一般设计原则第2部分：技术原则与规范
EN 292-2/A1:1995	Safety of machinery ─ Basic concepts, general principles for design Part 2: Technical principles and specifications ─ Amendment 1 机械安全：基础概念、一般设计原则第2部分：技术原则与规格(修正版1)
EN 294:1992	Safety of machinery ─ Safety distance to prevent danger zones being reached by the upper limbs 机械安全：预防上肢触及危险区域之安全距离
EN 349:1993	Safety of machinery ─ Minimum gaps to avoid crushing of parts of the human body 机械安全：避免人体部位被压碎之最小间距
EN 415-1:2000	Safety of packaging machines ─ Part 1: Terminology and classification of packaging machines and associated equipment 包装机械之安全：第1部分：包装机械与相关设备之术语与分类
EN 415-2:1999	Packaging machines Safety ─ Part 2: Pre-formed rigid container packaging machines 包装机械之安全：第2部分：预先成型硬式容器包装机
EN 415-3:2000	Safety of packaging machines ─ Part 3: Form, fill and seal machines 包装机械之安全：第3部分：成型，填充与密封机
EN 415-4:1997	Safety of packaging machines ─ Part 4: Palletisers and depolarizers 包装机械之安全：第4部分：栈板装载器和栈板卸载器

EN 418:1992	Safety of machinery ─ Emergency stop equipment, functional aspects ─ Principles for design 机械安全：紧急停止装置功能 — 设计原则
EN 422:1995	Rubber and plastics machines ─ Safety Blow moulding machines intended for the production of hollow articles ─ Requirements for the design and construction 橡胶/塑料机械 — 安全性空心件生产用吹塑机 — 设计与制造要求
EN 453:2000	Food processing machinery ─ Dough mixers ─ Safety and hygiene requirements 食品加工机械：面团搅拌机 — 安全与卫生之要求
EN 454:2000	Food processing machinery ─ Planetary mixers ─ Safety and hygiene requirements 食品加工机械：行星搅拌机 — 安全与卫生之要求
EN 457:1992	Safety of machinery ─ Auditory danger signals General requirements, design and testing (ISO 7731:1986 ─ Modified) 机械安全：听觉危险讯号 — 基本要求，设计与测试
EN 474-1:1994	Earth-moving machinery ─ Safety Part1: General requirements 搬土机：安全性第1部分：基本要求
EN 474-1/A1:1998	Earth-moving machinery ─ Safety Part 1: General requirements ─ Amendment 1 搬土机：安全性第1部分：基本要求(修正版1)
EN 474-2:1996	Earth-moving machinery ─ safety Part 2: Requirements for tractor-dozers 搬土机：安全性第2部分：履带式推土机之要求

EN 474-3:1996	Earth-moving machinery ─ safety Part 3: Requirements for loaders 搬土机：安全性第3部分：装料机之要求
EN 474-4:1996	Earth-moving machinery ─ safety Part 4: Requirements for backhoe loaders 搬土机：安全性第4部分：挖掘装载机之要求
EN474-5:1996	Earth-moving machinery ─ safety Part 5: Requirements for hydraulic excavators 搬土机：安全性第5部分：液压式挖掘机之要求
EN 474-6:1996	Earth-moving machinery ─ safety Part 6: Requirements for dumpers 搬土机：安全性第6部分：翻斗车的要求
EN 474-7:1998	Earth-moving machinery ─ safety Part 7: Requirements for scrapers 搬土机：安全性第7部分：铲运机之要求
EN474-8:1998	Earth-moving machinery ─ safety Part 8: Requirements for graders 搬土机：安全性第8部分：平地机之要求
EN 474-9:1998	Earth-moving machinery ─ safety Part 9：Requirement for pipelayers 搬土机：安全性第9部分：管道敷设机之要求
EN 474-10:1998	Earth-moving machinery ─ safety Part 10：Requirement for trenchers 搬土机：安全性第10部分：挖沟机之要求
EN 474-11:1998	Earth-moving machinery ─ safety Part 10：Requirement for earth and landfill compactors 搬土机：安全性第11部分：土地与垃圾掩埋压实机

EN 500-1:1995	Mobile road construction machinery ― Safety Part 1：Common requirements 移动式造路机：安全性第1部分：一般要求
EN 500-2:1995	Mobile road construction machinery ― Safety Part 2：Specific requirements for road-milling machines 移动式造路机：第2部分：路面研压机之特殊要求
EN 500-3:1995	Mobile road construction machinery ― Safety Part 3: Specific requirements for soil stabilisation machines 移动式造路机：第3部分：土壤稳定机之特殊要求
EN 500-4:1995	Mobile road construction machinery ─ Safety Part 4: Specific requirements for compaction machines 移动式造路机：第4部分：压实机之特殊要求
EN 528:1996	Rail dependent storage and retrieval equipment ─ Safety 轨道式存储和卸取设备之安全
EN 528/A1:2002	Rail dependent storage and retrieval equipment ─ Safety ─ Amendment 1 轨道式存储和卸取设备之安全 (修正版1)
EN 536:1996	Road construction machines ─ Asphalt mixing plants ─ Safety requirements 造路机：沥青搅拌设备安全要求
EN 547-1:1996	Safety of machinery ─ Human body measurements Part 1: Principles for determining the dimensions required for openings for the whole body access into machinery 机械安全：人体测重第1部分：确定整个人体进入机械设备通道所需尺寸的原则
EN 547-2:1996	Safety of machinery ─ Human body measurements Part 2: Principles for determining the dimensions required for access openings 机械安全：人体测重第2部分：确定进入通道所需尺寸的原则

EN 547-3:1996	Safety of machinery ─ Human body measurements Part 3: Anthropometric data 机械安全：人体测重第3部分：人体资料
EN 563:1994	Safety of machinery ─ Temperatures of touchable surfaces Ergonomics data to establish temperature limit values for hot surfaces 机械安全：可碰触表面之温度用人体工学数据来建立高温表面的温度限制值
EN 563/A1:1999	Safety of machinery ─ Temperatures of touchable surfaces Ergonomics data to establish temperature limit values for hot surfaces ─ Amendment 1 机械安全：可碰触表面之温度用人体工学数据来建立高温表面的温度限制值(修正版1)
EN 574:1996	Safety of machinery ─ Two-hand control devices Functional aspects ─ Principles for design 机械安全：双手控制装置 — 功能方面 — 设计原理
EN 608:1994	Agricultural and forestry machinery ─ Portable chain saws ─ Safety 农业与木工机械：可携带式电锯—安全性
EN 609-1:1999	Agricultural and forestry machinery ─ Safety of log splitters Part 1: Wedge splitters 农业与林业机械：原木分裂机的安全性第1部分：楔子分裂机
EN 609-2:1999	Agricultural and forestry machinery ─ Safety of log splitters Part 2: Screw splitters 农业与木工机械：原木分裂机的安全性第2部分：螺钉分裂机
EN 614-1:1995	Safety of machinery ─ Ergonomic design principles Part 1: Terminology and general principles 机械安全：人体工学设计之原理第1部分：术语与一般原则

EN 614-2:2000	Safety of machinery ─ Ergonomic design principles Part 2: Interactions between the design of machinery and work tasks 机械安全：人体工学设计之原理第2部分：机械的设计与工作目标之间的相互作用
EN 617:2001	Continuous handling equipment and systems ─ Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers 连续搬运设备和系统：储存大量原料的筒仓、燃料库、箱子、槽之设备之安全性与EMC要求
EN 618:2002	Continuous handling equipment and systems ─ Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors 连续搬运设备和系统：散装物料机械搬运设备(不包括固定式输送带装置)的安全和(EMC)要求
EN 619:2002	Continuous handling equipment and systems ─ Safety and EMC requirements for equipment for mechanical handling of unit loads 连续搬运设备和系统：成组货件机械搬运设备的安全性和电磁兼容性的要求
EN 620:2002	Continuous handling equipment and systems ─ Safety and EMC requirements for fixed belt conveyors for bulk materials 连续搬运设备和系统：散装物料用固定传送装置的安全和EMC要求
EN 626-1:1994	Safety of machinery ─ Reduction of risks to health from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers 机械安全：降低由机器射出对人体健康有害之危险物质第1部分：机械制造者之原则与规格
EN 626-2:1996	Safety of machinery ─ Reduction of risks to health from hazardous substances emitted by machinery Part 2: Methodology leading to verification procedures 机械安全：降低由机器射出对人体健康有害之危险物质第2部分：检验程序指导方法
EN 627:1995	Specification for data logging and monitoring of lifts, escalators and passenger conveyors 升降机、电扶梯与载客用输送带数据输入和监控规范
EN 632:1995	Agricultural machinery ─ Combine harvesters and forage harvesters ─ Safety 农业机械：联合收割机和草料收割机 — 安全性
EN 690:1994	Agricultural machinery ─ Manure spreaders ─ Safety 农业机械：施肥机 — 安全性
EN 692:1996	Mechanical presses ─ Safety 机械压力机 — 安全性
EN 693:2000	Machine tools ─ Hydraulic presses ― Safety 机械工具 — 安全性 — 液压压力机
EN 704:1999	Agricultural machinery ─ Pick-up balers ─ Safety 农业机械：捆包机 — 安全性
EN 706:1996	Safety requirements for agricultural and forestry machinery ─ Vine shoot tipping machines ─ Safety 农业机械：葡萄蔓切割翻转机 — 安全性
EN 707:1999	Agricultural machinery ─ Slurry tankers ─ Safety 农业机械：泥浆罐车 — 安全性
EN 708:1996	Agricultural machinery ─ Soil working machines with powered tools ─ Safety 农业机械：电动驱动的土壤整地机械 — 安全性
EN 708/A1:2000	Agricultural machinery ─ Soil working machines with powered tools ─ Safety ─ Amendment 1 农业机械：电动驱动的土壤整地机械 — (修正版1)
EN 709:1997	Agricultural and forestry machinery ─ Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) ─ Safety 农业与林业机械：带可动刀中耕机,电动锄及带驱动轮电动锄的可在侧面步行操纵的拖拉机 — 安全性
EN 709/A1:1999	Agricultural and forestry machinery ─ Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) ─ Safety Amendment 1 农业与林业机械：带可动刀中耕机,电动锄及带驱动轮电动锄的可在侧面步行操纵的拖拉机 — 安全性 (修正版1)
EN 710:1997	Safety requirements for foundry moulding and core making machinery and plant and associated equipment 铸模、制芯机械、工厂及相关设备之安全要求
EN 741:2000	Continuous handling equipment and systems ─ Safety requirements for systems and their components for pneumatic handling of bulk materials 连续装卸设备与系统：松散材料的气压装卸系统以及组件的安全要求
EN 745:1999	Agricultural machinery ─ Rotary mowers and flail-mowers ─ Safety 农业机械：旋转式割草机与甩刀式割草机 — 安全性
EN 746-1:1997	Industrial thermoprocessing equipment ─ Part 1: Common safety requirements for industrial thermoprocessing equipment 工业用热处理设备：第1部分：工业热处理设备之通同安全要求
EN 746-2:1997	Industrial thermoprocessing equipment ─ Part 2: Safety requirements for combustion and fuel handling systems 工业用热处理设备：第2部分：燃烧与燃料处理系统之安全要求
EN 746-3:1997	Industrial thermoprocessing equipment ─ Part 3: Safety requirements for the generation and use of atmosphere gases 工业用热处理热设备：第3部分：环境气体的产生与使用之安全要求

EN746-4: 2000	Industrial thermoprocessing equipment ─ Part 4: Particular safety requirements for hot dip galvanizing thermoprocessing equipment 工业用热处理设备：第4部分：热浸镀锌热处理设备之特殊安全要求
EN 746-5:1999	Industrial thermoprocessing equipment ─ Part 5: Particular safety requirements for salt bath thermoprocessing equipment 工业用热处理设备：第5部分：盐浴热处理设备之特殊安全要求
EN 746-8:1999	Industrial thermoprocessing equipment ─ Part 8: Particular safety requirements for quenching equipment 工业用热处理设备：第8部分：淬火设备之特殊安全要求
EN 774:1996	Garden equipment ─ Hand held, integrally powered hedge trimmers ─ Safety 园艺设备：手提式电动篱笆修剪机 — 安全性
EN 774/A1:1997	Garden equipment ─ Hand held, integrally powered hedge trimmers ─ Safety ─ Amendment 1 园艺设备：手提式电动篱笆修剪机 — 安全性(修正版1)
EN 774/A2:1997	Garden equipment ─ Hand held, integrally powered hedge trimmers ─ Safety ─ Amendment 2 园艺设备：手提式电动篱笆修剪机 — 安全性(修正版2)
EN 774/A3:2001	Garden equipment ─ Hand held, integrally powered hedge trimmers ─ Safety ─ Amendment 3 园艺设备：手提式电动篱笆修剪机 — 安全性(修正版 3)
EN 775:1992	Manipulating industrial robots ─ Safety (ISO 10218:1992 ─ Modified) 操作工业机械人 — 安全性

EN 786:1996	Garden equipment ─ Electrically powered walk-behind and lawn edge trimmers ─ Mechanical safety 园艺设备：电动步行手扶剪草机和草地修边机 — 机械安全
EN 786/A1:2001	Garden equipment ─ Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers ─ Mechanical safety ─ Amendment 1 园艺设备：电动步行手扶剪草机和草地修边机 — 机械安全(修正版1)
EN 791:1995	Drill rigs ─ Safety 钻探钻机 — 安全性
EN 792-1:2000	Hand-held non-electric power tools ─ Safety requirements Part 1: Assembly power tools for non-threaded mechanical fasteners 手持式非电动工具：安全要求第1部分：非螺纹机械紧固件用组装动力工具
EN 792-2:2000	Hand-held non-electric power tools ─ Safety requirements Part 2: Cutting- off and crimping power tools 手持式非电动工具：安全要求第2部分：切割和卷边动力工具
EN 792-3:2000	Hand-held non-electric power tools ─ Safety requirements Part 3: Drills and tappers 手持非电动工具：安全要求第3部分：钻头与攻牙机
EN 792-4:2000	Hand-held non-electric power tools ─ Safety requirements Part 4: Non-rotary percussive power tools 手持非电动工具：安全要求第4部分：非旋转撞击式动力工具
EN 792-5:2000	Hand-held non-electric power tools ─ Safety requirements Part 5: Rotary percussive drills 手持非电动工具：安全要求第5部分：旋转冲击钻孔机

EN 792-6:2000	Hand-held non-electric power tools ─ Safety requirements Part 6: Assembly power tools for threaded fasteners 手持非电动工具：安全要求第6部分：螺纹紧固件用装配动力工具
EN 792-7:2001	Hand-held non-electric power tools ─ Safety requirements Part 7: Grinders 手持非电动工具：安全要求第7部分：角磨机
EN 792-8:2001	Hand-held non-electric power tools ─ Safety requirements Part 8: Polishers and sanders 手持非电动工具：安全要求第8部分：抛光机与磨砂机
EN 792-9:2001	Hand-held non-electric power tools ─ Safety requirements Part 9: Grinders 手持非电动工具：安全要求第9部分：角磨机
EN 792-10:2000	Hand-held non-electric power tools ─ Safety requirements Part 10: Compression power tools 手持非电动工具：安全要求第10部分：压缩动力工具
EN 792-11:2000	Hand-held non-electric power tools ─ Safety requirements Part 11: Nibblers and shears 手持非电动工具：安全要求第11部分：步冲轮廓机与剪切机
EN 792-12:2000	Hand-held non-electric power tools ─ Safety requirements Part 12: Small circular, small oscillating and reciprocating saws 手持非电动工具：安全要求第12部分：小循环、小振荡和往复式锯
EN 792-13:2000	Hand-held non-electric power tools ─ Safety requirements Part 13: Fastener driving tools 手持非电动工具：安全要求第13部分：紧固件传动工具
EN 809:1998	Pumps and pump units for liquids ─ Common safety requirements 液体专用泵与泵组件：通用安全要求

EN 811:1996	Safety of machinery ─ Safety distances to prevent danger zones being reached by the lower limbs 机械安全：预防下肢触及危险区域之安全距离
EN 815:1996	Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock 岩石用未掩蔽的隧道钻凿机和无杆隧道钻凿机的安全
EN 818-1:1996	Short link chain for lifting purposes ─ Safety Part 1: General conditions of acceptance 起重用短链接链：安全性第1部分：一般验收条件
EN 818-2:1996	Short link chain for lifting purposes ─ Safety Part 2: Medium tolerance chain for chain slings ─ Grade 8 起重用短链接链：安全性第2部分：质量等级8止文件链用中级公差圆钢吊链
EN 818-3:1999	Short link chain for lifting purposes ─ Safety Part 3: Medium tolerance chain for chain slings ─ Grade 4 起重用短链接链：安全性第3部分：质量等级4止文件链用中级公差圆钢吊链
EN 818-4:1996	Short link chain for lifting purposes ─ Safety Part 4: Chain slings ─ Grade 8 起重用短链接链：安全性第4部分：质量等级8吊链
EN 818-5:1999	Short link chain for lifting purposes ─ Safety Part 5: Chain slings ─ Grade 4 起重用短链接链：安全性第5部分：质量等级4吊链
EN 818-6:2000	Short link chain for lifting purposes ─ Safety Part 6: Chain slings ─ Specification for information for use and maintenance to be provided by the manufacturer 起重用短链接链：安全性第6部分：吊式锁链 — 制造商提供使用和维修之规范
EN 818-7:2002	Short link chain for lifting purposes ─ Safety Part 7: Fine tolerance chain for hoists, Grade T (Types T, DT and DAT) 起重用短链接链：安全性第7部分：等级T(类型T, DAT和DT)起重机精密公差吊链

EN 836:1997	Garden equipment ─ Powered lawnmowers ─ Safety 园艺设备：电动草坪割草机 — 安全性
EN 836/A1:1997	Garden equipment ─ Powered lawnmowers ─ Safety ─ Amendment 1 园艺设备：电动草坪割草机 — 安全性(修正版1)
EN 836/A2:2001	Garden equipment ─ Powered lawnmowers ─ Safety ─ Amendment 2 园艺设备：电动草坪割草机 — 安全性(修正版 2)
EN 842:1996	Safety of machinery ─ Visual danger signals General requirements, design and testing 机械安全：光学危险讯号 — 一般需求、设计与检验
EN 848-1:1998	Safety of woodworking machines ─ One side moulding machines with rotating tool Part 1: Single spindle vertical moulding machines 木工机器之安全性：带旋转工具的单边铸模机第1部分：单轴立式铸模机
EN 848-1/A1:2000	Safety of woodworking machines ─ One side moulding machines with rotating tool Part 1: Single spindle vertical moulding machines ─ Amendment 1 木工机器之安全性：带旋转工具的单边铸模机第1部分：单轴立式铸模机
EN 848-2:1998	Safety of woodworking machines ─ One side moulding machines with rotating tool Part 2: Single spindle handfed integrated fed routing machines 木工机器之安全性：带旋转工具的单边铸模机第2部分：单轴手工加料/综合加料机
EN 848-3:1999	Safety of woodworking machines ─ One side moulding machines with rotating tool Part 3: Numerical control (NC) boring machines and routing machines 木工机器之安全性：带旋转工具的单边铸模机第3部分：数字控制镗床与钻板机
EN 859:1997	Safety of woodworking machines ─ Handfed surface planning machines 木工机器之安全性：人工加料平刨床
EN 860:1997	Safety of woodworking machines ─ One side thickness planning machines 木工机器之安全性：单面去厚度刨床
EN 861:1997	Safety of woodworking machines ─ Surface planning and thicknessing machines 木工机器之安全性：表面刨平与定厚度刨床
EN 869:1997	Safety requirements for high pressure metal diecasting units 高压金属压铸装置之安全要求
EN 894-1:1997	Safety of machinery ─ Ergonomics requirements for the design of displays and control actuators ─ Part 1: General principles for human interactions with displays and control actuators 机械安全：显示器的设计与控制驱动器之人体工学第1部分：人员和显示器与控制驱动器的互相影响之一般原则
EN 894-2:1997	Safety of machinery ─ Ergonomics requirements for the design of displays and control actuators Part 2: Displays 机械安全：人体工学 — 显示器的设计与控制驱动器第2部分：显示器
EN894-3:2000	Safety of machinery ─ Ergonomics requirements for the design of displays and control actuators Part 3: Control actuators 机械安全：人体工学 — 显示器的设计与控制驱动器第3部分：控制驱动器
EN 907:1997	Agricultural and forestry machinery ─ Sprayers and liquid fertilizer distributors ─ Safety 农业与林业机械：喷洒器与液态肥料喷洒器 ― 安全性
EN 908:1999	Agricultural and forestry machinery ─ Reel machines for irrigation ─ Safety 农业与林业机械：灌溉用卷筒机 — 安全性
EN 909:1998	Agricultural and forestry machinery ─ Centre pivot and moving lateral types irrigation machines ─ Safety 农业与林业机械：中心轴与侧移动式灌溉机械 — 安全性

EN 930:1997	Footwear, leather and imitation leather goods manufacturing machines ― Roughing, scouring, polishing and trimming machines ─ Safety requirements 鞋类、皮革与人造皮革制品之制造机械粗加工、刷洗、上光和整理机械 — 安全要求
EN 931:1997	Footwear manufacturing machines ─ Lasting machines ─ Safety requirements 鞋类制造机：拉伸机械 — 安全性
EN 940:1997	Safety of woodworking machines ─ Combined woodworking machines 木工机器之安全性：多功能木工机
EN 953:1997	Safety of machinery ─ Guards General requirements for the design and construction of fixed and movable guards 机械安全：防护罩一般需求 — 固定式与移动式护罩之设计与建造
EN 954-1:1996	Safety of machinery ─ Safety-related parts of control systems Part 1: General principles for design 机械安全：控制系统的安全相关部位第1部分：一般设计原则
EN 972:1998	Tannery machines ─ Reciprocating roller machines ─ Safety requirements 制革机器：往复式滚轮机 — 安全要求
EN 981:1996	Safety of machinery ─ System of auditory and visual danger and information signals 机械安全：听觉、视觉危险、信号系统
EN 982:1996	Safety of machinery ─ Safety requirements for fluid power systems and their components ─ Hydraulics 机械安全：流体动力系统及其组件之安全要求-液压
EN 983:1996	Safety of machinery ─ Safety requirements for fluid power systems and their components ─ Pneumatics 机械安全：流体动力系统及其组件之安全要求-气压
EN 996:1995	Piling equipment ─ Safety requirements 打桩设备：安全要求
EN 996/A1:1999	Piling equipment ─ Safety requirements ─ Amendment 1 打桩设备：安全要求(修正版1)
EN 996/A2:1999	Piling equipment ─ Safety requirements ─ Amendment 2 打桩设备：安全要求(修正版2)
EN 999:1998	Safety of machinery ─ The positioning of protective equipment in respect of approach speeds of parts of the human body 机械安全：有关与人体部分接近速度的保护设备的位置
EN 1005-1:2001	Safety of machinery ─ Human physical performance Part 1: Terms and definitions 机械安全：人体物理性能 — 术语与定义
EN 1005-2:2003	Safety of machinery ─ Human physical performance ─ Part 2: Manual handling of machinery and component parts of machinery 机械安全：人体物理性能 — 术语与定义第2部分：人工操作的机械与机械组件
EN 1005-3:2002	Safety of machinery ─ Human physical performance ─ Part 3: Recommended force limits for machinery operation 机械安全：人体物理性能第3部分：机械操工作能力的推荐极限值
EN 1010-3:2002	Safety of machinery ─ Safety requirements for the design and construction of printing and paper converting machines Part 3: Cutting machines 机械安全：印刷和纸张转换机的设计和结构的安全要求第3部分：切割机
EN 1012-1:1996	Compressors and vacuum pumps ─ Safety requirements ─ Part 1: Compressors 压缩机与真空泵浦：安全要求第1部分：压缩机
EN 1012-2:1996	Compressors and vacuum pumps ─ Safety requirements ─ Part 2: Vacuum pumps 压缩机与真空泵浦：安全要求第2部分：真空泵浦

EN 1028-1:2002	Fire-fighting pumps ─ Fire-fighting centrifugal pumps with primer Part 1: Classification ─ General and safety requirements 消防泵：带启动器的消防离心泵第1部分：分类、一般和安全要求
EN 1028-2:2002	Fire-fighting pumps ─ Fire-fighting centrifugal pumps with primer Part 2: Classification ─ Verification of general and safety requirements 消防泵：带启动器的消防离心泵第2部分：一般和安全要求的验证
EN 1032:1996	Mechanical vibration ─ Testing of mobile machinery in order to determine the whole-body vibration emission value ─ General 机械的震动：测试移动式机械来测定整个机械震动散发值
EN 1032/A1:1998	Mechanical vibration ─ Testing of mobile machinery in order to determine the whole-body vibration emission value ─ General ─ Amendment 1 机械的震动：测试移动式机械来测定整个机械震动散发值 (修正版 1)
EN 1033:1995	Hand-arm vibration ─ Laboratory measurement of vibration at the grip surface of hand-guided machinery ─ General 手臂震动：手操纵机器把手平面振动的试验室测量
EN 1034-3:1999	Safety of machinery ─ Safety requirements for the design and construction of paper making and finishing machines Part 3: Winders and slitters, plying machines 机械安全：造纸机械和精整机的设计和建造安全要求第3部分：卷纸机、纵切机和绞合机
EN 1037:1995	Safety of machinery ─ Prevention of unexpected start-up 机械安全：避免意外之启动
EN 1050:1996	Safety of machinery ─ Principles for risk assessment 机械安全：风险评估之原则
EN 1088:1995	Safety of machinery ─ Interlocking devices associated with guards ─ Principles for design and selection 机械安全：和护罩相连的互锁装置— 设计与选择的原则

EN 1093-1:1998	Safety of machinery ─ Evaluation of the emission of airborne hazardous substances Part 1: Selection of test methods 机械安全：空气有害物质排放之评估第1部分：测试方法之选择
EN 1093-3:1996	Safety of machinery ─ Evaluation of the emission of airborne hazardous substances Part 3: Emission rate of a specified pollutant ─ Bench test method using the real pollutant 机械安全：空气有害物质排放之评估第3部分：特定污染物之排放率 — 实际污染物之评定测试法
EN 1093-4:1996	Safety of machinery ─ Evaluation of the emission of airborne hazardous substances Part 4: Capture efficiency of an exhaust system ─ Tracer method 机械安全：空气有害物质排放之评估第4部分：排气系统的收集率 — 追踪法
EN 1093-6:1998	Safety of machinery ─ Evaluation of the emission of airborne hazardous substances Part 6: Separation efficiency by mass, unducted outlet 机械安全：空气有害物质排放之评估第6部分：通过未经管道流出的质量来评价分离离效率
EN 1093-7:1998	Safety of machinery ─ Evaluation of the emission of airborne hazardous substances Part 7: Separation efficiency by mass, ducted outlet 机械安全：空气有害物质排放之评估第7部分：通过经管道流出的质量来评价分离离效率
EN 1093-8:1998	Safety of machinery ─ Evaluation of the emission of airborne hazardous substances Part 8: Pollutant concentration parameter, test bench method 机械安全：空气有害物质排放之评估第8部分：分组法测定污染物的浓度参数

EN 1093-9:1998	Safety of machinery ─ Evaluation of the emission of airborne hazardous substances Part 9: Pollutant concentration parameter, room method 机械安全：空气有害物质排放之评估第9部分：空气污染物物质之浓度参数，室内法
EN 1093-11:2001	Safety of machinery ─ Evaluation of the emission of airborne hazardous substances Part 11: Decontamination index 机械安全：空气有害物质之排出评估第11部分：净化指数
EN 1114 -1:1996	Rubber and plastics machines ─ Extruders and extrusion lines Part 1: Safety requirements for extruders 橡胶与塑料机械：挤压机与挤压工作线第1部分：挤压机之安全要求
EN 1114-2:1998	Rubber and plastics machines ─ Extruders and extrusion lines Part 2: Safety requirements for face pelletisers 橡胶与塑料机械：挤压机与挤压工作线第2部分：冲模表面造粒机之安全要求
EN 1114-3:2001	Rubber and plastics machines ─ Extruders and extrusion lines Part 1: Safety requirements for haul-offs 橡胶与塑料机械：挤压机与挤压设备 Part 3：压出机之安全要求
EN 1127-1:1997	Explosive atmospheres ─ Explosion prevention and protection Part 1: Basic concepts and methodology 爆炸性环境：爆炸防止与防护第1部分：基础概念与方法
EN 1152:1994	Tractors and machinery for agriculture and forestry ─ Guards for power take-off (PTO) drive shafts ─ Wear and strength tests 农业与林业用拖拉机和机械：动力输出驱动轴保护耐磨和强度试验
EN 1175-1:1998	Safety of industrial trucks ─ Electrical requirements Part 1: General requirements for battery powered trucks 搬运车辆之安全性：电气需求第1部分：蓄电池驱动货车之一般要求

EN 1175-2:1998	Safety of industrial trucks ─ Electrical requirements Part 2: General requirements of internal combustion engine powered trucks 搬运车辆之安全性：电气需求第2部分：内燃机驱动货车之一般要求
EN 1175-3:1998	Safety of industrial trucks ─ Electrical requirements Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks 工业卡车之安全性：电的需求第3部分：内燃机驱动货车电力传输系统之特殊要求
EN 1218-1:1999	Safety of woodworking machines ─ Tenoning machines Part 1: Single end tenoning machines with sliding table 木工机械之安全性：作榫机第1部分：带滑动工作台之单端作榫机
EN 1218-3:2001	Safety of woodworking machines ─ Tenoning machines Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers 木工机械之安全性：作榫机第3部分：用于切割建筑木材的带滑动工作台的手工进料的制榫机
EN 1248:2001	Foundry machinery ─ Safety requirements for abrasive blasting equipment 铸造机械：喷砂设备之安全要求
EN 1265:1999	Noise test code for foundry machines and equipment 铸造机械与设备的噪音测试法
EN 1299:1997	Mechanical vibration and shock ─ Vibration isolation of machines ─ Information for the application of source isolation 机械的震动与冲击：机器震动隔离 — 震源隔离使用的说明
EN 1374:2000	Agricultural machinery ─ Silo stationary unloaders for round silos ─ Safety 农业机械：圆形青贮窑的固定卸料机 — 安全性
EN 1398:1997	Dock levellers 浮坞平衡装置

EN 1417:1996	Rubber and plastics machines ─ Two-roll mills ─ Safety requirements 橡胶与塑料加工机械：双辊式破碎机之安全要求
EN 1454:1997	Portable, hand-held, internal combustion cutting-off machines ─ Safety 手提式、掌上型内燃切割机械：安全性
EN 1459:1999	Safety of industrial trucks ─ Self-propelled variable reach trucks 工业用卡车之安全性：自推式可变延伸卡车
EN 1492-1:2000	Textile slings ─ Safety Part 1: Specification for flat woven webbing slings, made of man-made fibres, for general purpose use 纺织吊索：安全性第1部分：一般用途人造纤维扁平织物吊索
EN 1492-2:2000	Textile slings ─ Safety Part 2: Specification for roundslings, made of man-made fibres, for general purpose use 纺织吊索：安全性第2部分：一般用途化学纤维圆吊索
EN 1493:1998	Vehicle lifts 汽车升降平台
EN 1494:2000	Mobile or movable jacks and associated lifting equipment 移动或可活动的千斤顶及有关升降设备
EN 1495:1997	Lifting platforms ─ Mast climbing work platforms 升降平台：桅杆攀爬工作平台
EN 1501-1:1998	Refuse collection vehicles and their associated lifting devices ─ General requirements and safety requirements Part 1: Rear-end loaded refuse collection vehicles 垃圾车与附属提升装置：一般要求与安全要求第1部分：后方装载式垃圾车
EN 1525:1997	Safety of industrial trucks ─ Driverless trucks and their systems 工业用货车之安全性：无驾驶的卡车及其系统
EN 1526:1997	Safety of industrial trucks ─ Additional requirements for automated functions on trucks 工业卡车之安全性：卡车自动功能之附加要求

EN 1539:2000	Dryers and ovens, in which flammable substances are released ─ Safety requirements 释放出易燃性物质烘干机与烤箱的安全要求
EN 1547:2001	Industrial thermoprocessing equipment ─ Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment 工业热处理设备：工业热处理设备以及其附属设备的噪音试验规则
EN 1550:1997	Machine-tools safety ─ Safety requirements for the design and construction of work holding chucks 机床之安全性：工件夹具用卡盘的设计和结构的安全性要求
EN 1551:2000	Safety of industrial trucks ─ Self-propelled trucks over 10 000 kg capacity 工业卡车之安全性：载荷超过10000kg的自驱动卡车
EN 1552:2003	Underground mining machines ─ Mobile extracting machines at the face Safety requirements for shearer loaders and plough systems 地下采矿机械：采掘面上移动采掘机器开辟采掘面机械和刨煤机系统之安全要求
EN 1553:1999	Agricultural machinery ─ Agricultural self-propelled, mounted, semi-mounted and trailed machines ─ Common safety requirements 农业机械：农业自走式、悬挂式、半悬挂式、拖引式机械 — 通用安全要求
EN 1570:1998	Safety requirements for lifting tables 升降台之安全要求
EN 1612-1:1997	Rubber and plastics machines ─ Reaction moulding machines Part 1: Safety requirements for metering and mixing units 橡胶与塑料机械：反应模塑机械第1部分：测量与混合装置的安全要求

EN 1612-2:2000	Rubber and plastics machines ─ Reaction moulding machines Part 2: Safety requirements for reaction moulding plant 橡胶与塑料机械：反应模塑机械第2部分：反应模压车间的安全要求
EN 1672-2:1997	Food processing machinery ─ Basic concepts Part 2: Hygiene requirements 食品加工机械：基础概念第2部分：卫生要求
EN 1673:2000	Food processing machinery ─ Rotary rack ovens ─ Safety and hygiene requirements 食品加工机械：旋转搁架式烤炉— 安全与卫生要求
EN 1674:2000	Food processing machinery ─ Dough and pastry brakes ─ Safety and hygiene requirements 食品加工机械：生面和面团辊轧机— 安全与卫生要求
EN 1677-1:2000	Components for slings ─ Safety Part 1: Forged steel components, Grade 8 吊索的零件：安全性第1部分：八级锻造钢铁零件
EN 1677-2:2000	Components for slings ─ Safety Part 2: Forged steel lifting hooks with latch, Grade 8 吊索的零件：安全性第2部分：八级锻造钢铁带卡齿吊钩
EN 1677-3:2001	Components for slings ─ Safety Part 3: Forged steel self-locking hooks ─ Grade 8 吊索的零件：安全性第2部分：八级锻造钢铁自动锁吊钩
EN 1677-4:2000	Components for slings ─ Safety Part 4: Links, Grade 8 吊索的零件：安全性第4部分：八级链环
EN 1677-5:2001	Components for slings ─ Safety Part 5: Gorged steel lifting hooks with latch ─ Grade 4 吊索的零件：安全性第5部分：有闩锁的锻造钢铁起重吊钩，四级

EN 1677-6:2001	Components for slings ─ Safety Part 6: Links ─ Grade 4 吊索的零件：安全性第6部分：四级链环
EN 1678:1998	Food processing machinery ─ Vegetable cutting machines ─ Safety and hygiene requirements 食品加工机：蔬菜切削机械 — 安全与卫生要求
EN1679-1:1998	Reciprocating internal combustion engines ─ Safety Part 1: Compression ignition engines 往复式内燃发动机：安全性第1部分：压燃点火式发动机
EN 1726-1:1999	Safety of industrial trucks ─ Self-propelled trucks up to and including 10 000 kg capacity and industrial tractors with a drawbar pull up to and including 20 000 N ─ Part 1: General requirements 工业卡车之安全性：荷载能力至10000Kg的自驱式卡车和拉杆拉力至20000N的工业牵引车第1部分：一般要求
EN 1726-2:2000	Safety of industrial trucks ─ Self-propelled trucks up to and including 10 000 kg capacity and tractors with a drawbar pull up to and including 20 000 N Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads 工业卡车之安全性：工业卡车的安全 10000 Kg及以下容量的自驱式卡车和带有牵引力达到(包括)20000N的牵引装置的工业拖车第2部分：带有升高架操作者位置的货车和特别为有升高架荷载的货车的附加要求
EN 1755:2000	Safety of Industrial Trucks ─ Operation in potentially explosive atmospheres ― Use in flammable gas, vapor mist and dust 工业卡车之安全性：在可能发生爆炸的环境下操作 — 使用于易燃的气体，蒸气或灰尘下使用

EN 1756-1:2001	Tail lifts ─ Platform lifts for mounting on wheeled vehicles safety requirements Part 1: Tail lifts for goods 后置升降装置：安装在用轮子行驶的车辆上的平台式升降装置 Part 1：货物用后置升降装置
EN 1757-1:2001	Safety of industrial trucks ─ Pedestrian controlled trucks Part 1: Stacker trucks 工业卡车之安全性：非专业人员用货车 Part 1：堆货卡车
EN 1757-2:2001	Safety of industrial trucks ─ Pedestrian controlled trucks Part 2: Pallet trucks 工业卡车之安全性：非专业人员用货车 Part 2：站板卡车
EN 1760-1:1997	Safety of machinery ─ Pressure sensitive protective devices Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors 机械安全：压力感应保护装置 Part 1：一般原则，压力感应垫与压力感应地版之设计与测试用一般原则
EN 1760-2:2001	Safety of machinery ─ Pressure sensitive protective de vices Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars 机械安全：压力感应保护装置 Part 2：一般原则，压力感应边缘与压力棒设计与测验的一般规则
EN 1804-1:2001	Machines for underground mines ─ Safety requirements for hydraulic powered roof supports Part 1: Support units and general requirements 地下采矿机械：水压坑道顶棚支架的安全要求第1部分：支撑单位和一般要求
EN 1804-2:2001	Machines for underground mines ─ Safety requirements for hydraulic powered roof supports Part 2: Power set legs and rams 地下采矿机械：水压坑道顶棚支架的安全要求第2部分：动力调整支架和活塞

EN 1807:1999	Safety of woodworking machines ─ Band sawing machines 木工机械的安全性：带锯机械
EN 1808:1999	Safety requirements on suspended access equipment ─ Design calculations, stability criteria, construction ─ Tests 悬浮通道设备的安全要求设计计算稳定性准则结构试验
EN 1834-2:2000	Reciprocating internal combustion engines ─ Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust. 往复式内燃发动机：用在潜在爆炸环境下发动机设计结构和安全要求 Part 2：对瓦斯或易燃性灰尘敏感的地下作业用I组发动机
EN 1837:1999	Safety of machinery ─ Integral lighting of machines 机械安全：机器的整体照明
EN 1845:1998	Footwear manufacturing machines ─ Footwear moulding machines ─ Safety requirements 制鞋机械：鞋模机 — 安全要求
EN 1846-2:2001	Firefighting and rescue service vehicles ─ Part 2: Common requirements ─ Safety and performance 消防车与救援车： Part 2：通用要求 — 安全与性能
EN 1846-3:2002	Firefighting and rescue service vehicles ─ Part 3: Permanently installed equipment ─ Safety and performance 消防车和救援车：第3部分：永久性安装设备安全和性能
EN 1853:1999	Agricultural machinery ─ Trailers with tipping body ─ Safety 农业机械：带倾卸车身的拖车— 安全性

EN 1870-1:1999	Safety of woodworking machines ─ Circular sawing machines Part 1: Circular saw benches (with and without sliding table) and dimension saws 木工机械安全性：圆锯机 Part 1：圆锯台(带/不带滑动工作台)与方细木工锯
EN 1870-2:1999	Safety of woodworking machines ─ Circular sawing machines Part 2: Horizontal beam panel saws and vertical panel saws 木工机械的安全：圆锯机第2部分：水平束板锯和垂直板锯
EN 1870-3:2001	Safety of woodworking machines ─ Circular sawing machines Part 3: Down cutting cross-cut saws and dual purpose down cutting circular saw benches 木工机械安全性：圆锯机第3部分：下切横截锯和两用下切横截锯/圆锯台
EN 1870-4:2001	Safety of woodworking machines ― Circular sawing machines Part 4: Single and multi-blade rip sawing machines with manual loading and/or unloading 木工机械安全性：圆锯机第4部分：人工上下廖的多刀片锯床
EN 1870-5:2002	Safety of woodworking machines ― Circular sawing machines Part 5: Circular saw benches/up-cutting cross-cut sawing machines 木工机械安全性：圆锯床第5部分：圆锯台/上切横截锯机
EN 1870-6:2002	Safety of woodworking machines ― Circular sawing machines Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading 木工机械安全性：圆锯床第6部分：用人工上下薪炭材圆锯机和两用薪炭材用圆锯机/圆锯台
EN 1870-7:2001	Safety of woodworking machines ― Circular sawing machines Part 7: Circular log sawing machine with integrated feeding table and manual loading and/or unloading 木工机械安全性：圆锯床第7部分：带有送料机和人工上下料的圆锯机

EN 1870-8:2001	Safety of woodworking machines ― Circular sawing machines Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading 木工机械安全性：圆锯床第8部分：带有电力驱动锯切单元和人工上下料的单刃切边锯机
EN 1870-9:2000	Safety of woodworking machines ― Circular sawing machines Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading 木工机器的安全性：圆锯床第9部分：带综合进料台人工上下料的双刃圆锯机
EN 1889-1:2003	Machines for underground mines ― Mobile machines working underground ― Safety Part 1: Rubber tyred vehicles 地下采矿机械地下工作的移动机械之安全性第1部分：橡胶轮胎车
EN 1889-2:2003	Machines for underground mines ― Mobile machines working underground ― Safety Part 2: Rail locomotives 地下采矿机械地下工作的移动机械之安全性第2部分：轨道式机车
EN1915-1:2001	Aircraft ground support equipment ― General requirements Part 1: Basic safety requirements 飞机地勤支持设备：一般要求第1部分：基本安全要求
EN 1915-2:2001	Aircraft ground support equipment ― General requirements Part 2: Stability and strength requirements, calculations and test methods 飞机地勤支持设备：一般要求第2部分：稳定性与强度测试、计算与测试方法
EN 1953:1998	Atomising and spraying equipment for coating materials ― Safety requirements 涂层材料之雾化设备与喷雾设备 — 安全要求

EN 1974:1998	Food processing machinery ─ Slicing machines Safety and hygiene requirements 食品加工机：切片机 — 安全与卫生要求
EN ISO 2860:1999	Earth-moving machinery ─ Minimum access dimensions (ISO 2860:1992) 搬土机：最小出入口尺寸
EN ISO 2867:1998	Earth-moving machinery ─ Access systems (ISO 2867:1994) 搬土机：出入口装置
EN ISO 3164:1999	Earth-moving machinery ─ Laboratory evaluations of protective structures Specifications for deflection-limiting volume (ISO 3164:1995) 搬土机：防护结构的实验室评值极限偏差容量规范
EN ISO 3411:1999	Earth-moving machinery ─ Human physical dimensions of operators and minimum operator space envelope (ISO 3411:1995) 搬土机：操作者的人体尺寸与操作者最小座舱空间
EN ISO 3450:1996	Earth-moving machinery ― Braking systems of rubber-typed machines Performance requirements and test procedures (ISO 3450:1995) 搬土机：橡胶轮胎机械的煞车系统性能要求和检验程序
EN ISO 3457:2003	Earth-moving machinery ― Guards ― Definitions and requirements (ISO 3475:2003) 搬土机：防护罩与挡版 — 定义与说明(ISO 3457:1986)
EN ISO 3741:1999	Acoustics ― Determination of sound power levels of noise sources using sound pressure ― Precision methods for reverberation rooms (ISO 3741:1999) 声学：声压法测定噪声源的声功率级　混响室精密法

EN ISO 3743-1:1995	Acoustics ― Determination of sound power levels of noise sources ― Engineering methods for small, movable sources in reverberant fields Part 1﹕Comparison method for hard-walled test rooms (ISO 3743-1:1994) 声学：噪声源声功率级的测定.在混响声场中小声源和移动声源的工程测量方法 Part 1：硬墙实验室的对照分析法
EN ISO 3743-2:1996	Acoustics ― Determination of sound power levels of noise sources ― Engineering methods for small, movable sources in reverberant fields Part 2﹕Methods for special reverberation test rooms (ISO 3743-2:1994) 声学：噪声源声功率级的测定.在混响声场中小声源和移动声源的工程测量方法 Part 2：特殊回响测试室的方法
EN ISO 3744:1995	Acoustics ― Determination of sound power levels of noise sources using sound pressure ― Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) 声学：噪声源声功率级的测定. 一个反射面上方近似自由场中的工程法
EN ISO 3746:1995	Acoustics ― Determination of sound power levels of noise sources using sound pressure ― Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995) 听学：测定噪声源声功率位准的测定在反射平面上利用包封测量表面的测量法
EN ISO 3747:2000	Acoustics ― Determination of sound power levels of noise sources using sound pressure ― Comparison method for use in situ (ISO 3747:2000) 声学：声压法测定噪声源的声功率级　现场比较法
EN ISO 4871:1996	Acoustics ― Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) 听学：机器和设备噪音值的确定和验证

EN ISO 5136:1996	Acoustics ― Determination of sound power radiated into a duct by fans and other air-moving devices ― In-duct method (ISO 5136:2003) 声学：风扇或其它空气推动装置辐射入管道中的声功率的测定管道法
EN ISO 6682:1995	Earth-moving machinery ― Zones of comfort and reach for controls (ISO 6682:1986 including Amendment 1:1989) 搬土机：控制装置的最佳操作和活动范围 (ISO 6682:1996，包含1989 修正版1)
EN ISO 6683:1999	Earth-moving machinery ― Seat belts and seat belt anchorages (ISO 6683:1981 + Amendment 1:1990) 搬土机：安全带与座椅安全带固定件 (ISO 6683:1981+1990修正版1)
EN ISO 7096:2000	Earth-moving machinery ― Laboratory evaluation of operator seat vibration (ISO 7096:2000) 搬土机：操作者座位震动的实验室评估
EN ISO 7235:2003	Acoustics ― Laboratory measurement procedures for ducted silencers and air-terminal units ― Insertion loss, flow noise and total pressure loss (ISO 7235:1991) 听学：管道***和气端装置的实验室测量步骤　插入损失、流动噪声和总压损失
EN ISO 7250:1997	Basic human body measurements for technological design 用于技术设计的基本人体测量 (ISO 7250:1996)
EN ISO 8230:1997	Safety requirements for dry-cleaning machines using perchloroethylene 干洗机使用四氯乙烯之安全要求(ISO 8230:1997)
EN ISO 8662-4:1995	Hand-held portable power tools ― Measurement of vibrations at the handle Part 4﹕Grinders (ISO 8662-4:1994) 可手持携带式电动工具：把手的震动测量第4部分：磨床
EN ISO 8662-6:1995	Hand-held portable power tools ―Measurement of vibrations at the handle ― Part 6﹕Impact drills (ISO 8662-6:1994) 可手持携带式电动工具：把手的震动测量第6部分：冲击式电钻

EN ISO 8662-7:1997	Hand-held portable power tools ― Measurement of vibrations at the handle ― Part 7﹕Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action (ISO 8662-7:1997) 可手持携带式电动工具：把手的震动测量第7部分：扳手,旋具与具有冲击,冲力和刻踞齿作用的螺纹滚
EN ISO 8662-8:1997	Hand-held portable power tools ― Measurement of vibrations at the handle ― Part 8﹕Polishers and rotary, orbital and random orbital sanders 可手持携带式电动工具：把手的震动测量第8部分：抛光和旋转,轨道和随机轨道砂轮机(ISO 8662-8:1997)
EN ISO 8662-9:1996	Hand-held portable power tools ― Measurement of vibrations at the handle ― Part 9﹕Rammers (ISO 8662-9:1996) 可手持携带式电动工具：把手的震动测量第9部分：撞锤
EN ISO 8662-10:1996	Hand-held portable power tools ― Measurement of vibrations at the handle ― Part 10﹕Nibblers and shears (ISO 8662-10:1998) 可手持携带式电动工具：把手的震动测量第10部分：步冲轮廓机和剪切机械
EN ISO 8662-12:1997	Hand-held portable power tools ― Measurement of vibrations at the handle ― Part 12﹕Saws and files with reciprocating action and saws with oscillating or rotating action (ISO 8662-12:1997) 可手持携带式电动工具：把手的震动测量第12部分：有往复作用的锯和锉和有摆动或旋转作用的锯
EN ISO 8662-13:1997	Hand-held portable power tools ― Measurement of vibrations at the handle ― Part 13﹕Die grinders (ISO 8662-13:1997) 可手持携带式电动工具：把手的震动测量第13部分：模具研磨机

EN ISO 8662-14:1996	Hand-held portable power tools ― Measurement of vibrations at the handle ― Part 14﹕Stone-working tools and needle scalers (ISO 8662-14:1996) 可手持携带式电动工具：把手的震动测量第14部分：采石工具和针束除锈机
EN ISO 9614-1:1995	Acoustics ― Determination of sound power levels of noise sources using sound intensity ― Part 1﹕Measurement at discrete points (ISO 9614-1:1993) 声学：利用声强测定噪声源声功率位准声学第1部分：离散点测量
EN ISO 9614-3:2002	Acoustics ― Determination of sound power levels of noise sources using sound intensity ― Part 3﹕Precision method for measurement by scanning (ISO 9614-3:2002) 声学：利用声强测定噪声源声功率位准声学第3部分：扫描测量的精确方法
EN ISO 9902-1:2001	Textile machinery ― Noise test code Part 1﹕Common requirements 纺织机械：噪音测试模式 (ISO 9902-1:2001) 第1部分：共同需求
EN ISO 9902-2:2001	Textile machinery ― Noise test code ― Part 2﹕Spinning preparatory and spinning machinery (ISO 9902-2:2001) 纺织机械：噪音测试模式第2部分：旋转式纺织待机与纺织机械
EN ISO 9902-3:2001	Textile machinery ― Noise test code ― Part 3﹕Nonwoven machinery (ISO 9902-3:2001) 纺织机械：噪音测试模式第3部分：非纺织机械
EN ISO 9902-4:2001	Textile machinery ― Noise test code ― Part 4﹕Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001) 纺织机械：噪音测试模式第4部分：纱的加工、制造绳索的机械

EN ISO 9902-5:2001	Textile machinery ― Noise test code ― Part 5﹕Weaving and knitting preparatory machinery (ISO 9902-5:2001) 纺织机械：噪音测试模式第5部分：编织与针织用机械
EN ISO 9902-6:2001	Textile machinery ― Noise test code ― Part 6﹕Fabric manufacturing machinery (ISO 9902-6:2001) 纺织机械：噪音测试模式第6部分：织布机械
EN ISO 9902-7:2001	Textile machinery ― Noise test code ― Part 7﹕Dyeing and finishing machinery (ISO 9902-7:2001) 纺织机械：噪音测试模式第7部分：染整机械
EN ISO 10472-1:1997	Safety requirements for industrial laundry machinery Part 1﹕Common requirements (ISO 10472-1:1997) 工业用洗衣机之安全要求：第1部分：共同需求
EN ISO 10472-2:1997	Safety requirements for industrial laundry machinery Part 2﹕Washing machines and washer-extractors (ISO 10472-2:1997) 工业用洗衣机之安全要求：第2部分：洗衣机与洗衣烘干机
EN ISO 10472-3:1997	Safety requirements for industrial laundry machinery Part 3﹕Washing tunnel lines including component machines (ISO 10472-3:1997) 工业用洗衣机之安全要求：第3部分：包括各个组件机械的洗衣槽线
EN ISO 10472-4:1997	Safety requirement for industrial laundry machinery Part 4﹕Air dryer (ISO 4:1997) 工业用洗衣机之安全要求：第4部分：空气干燥机
EN ISO 10472-5:1997	Safety requirements for industrial laundry machinery ― Part 5﹕Flatwork ironers, feeders and folders (ISO 10472-5:1997) 工业用洗衣机之安全要求：第5部分：熨衣器、进料机、折迭机

EN ISO 10472-6:1997	Safety requirements for industrial laundry machinery ― Part 6﹕Ironing and fusing presses (ISO 10472-6:1997) 工业用洗衣机之安全要求：第6部分：烫压与熔压
EN ISO 11102-1:1997	Reciprocating internal combustion engines ― Handle starting equipment Part 1﹕Safety requirements and tests (ISO 11102-1:1997) 内燃机：把手启动设备第1部分：安全技术要求与检验
EN ISO 11102-2:1997	Reciprocating internal combustion engines ― Handle starting equipment Part 2﹕Method of testing the angle of disengagement (ISO 11102-2:1997) 内燃机：把手启动设备第2部分：脱离角度的测试方法
EN ISO 11111:1995	Safety requirements for textile machinery (ISO 11111:1995) 纺织机械的安全要求
EN ISO 11145:2001	Optics and optical instruments ― Lasers and laser related equipment ― Vocabulary and symbols (ISO 11145:2000) 光学与光学仪器：雷射与雷射相关设备 — 字汇与符号
EN ISO 11200:1995	Acoustics ― Noise emitted by machinery and equipment ― Guidelines for the use of basic standard for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995) 声学：机械与设备的噪音在工作站或其它特定场所的噪声源声功率位准之指导原则
EN ISO 11201:1995	Acoustics ― Noise emitted by machinery and equipment ― Measurement of emission sound pressure levels at a work station and at other specified positions ― Engineering method in an essentially free over a reflecting plane (ISO 11201:1995) 声学：机械与设备的噪音工作地点和其它试验场所声压级的测量.反射平面上基本自由声波场的工程测试

EN ISO 11202:1995	Acoustics ― Noise emitted by machinery and equipment ― Measurement of emission sound pressure levels at a work station and at other specified positions ― Survey method in situ 声学：机械与设备的噪音工作地点或其它特定场所辐射声压级的测量现场调查法(ISO 11202:1995)
EN ISO 11203:1995	Acoustics ― Noise emitted by machinery and equipment ― Measurement of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) 声学：机械与设备的噪音工作地点和其它声功率级试验场所的辐射声压级测量
EN ISO 11204:1995	Acoustics ― Noise emitted by machinery and equipment ― Measurement of emission sound pressure levels at a work station and at other specified positions ― Method requiring environmental corrections (ISO 11204:1995) 声学：机械与设备的噪音工作地点和其它试验场所声压级的测量.测试要求环境条件的改变
EN ISO 11546-1:1995	Acoustics ― Determination of sound insulation performances of enclosures Part 1﹕Measurement under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) 声学：密封罩隔音性能的测定第1部分：宣告用实验室条件下的测量
EN ISO 11546-2:1995	Acoustics ― Determination of sound insulation performances of enclosures Part 2﹕Measurement in situ for acceptance and verification purposes (ISO 11546-2:1995) 声学：密封罩隔音性能的测定第2部分：验收和校验部位的测量
EN ISO 11554:998	Optics and optical instruments ― Lasers and laser-related equipment ― Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2003) 光学与光学仪器：雷射与雷射相关设备 —激光束功率、能量与暂时性特征的检验方法

EN ISO 11680-1:2000	Machinery of forestry ― Safety requirements and testing for pole-mounted powered pruners Part 1﹕Units fitted with an integral combustion engine (ISO 11680-1:2000) 林业机器：动力杆式修枝锯的安全要求和试验第1部分：侧挂式杆式修枝剪
EN ISO 11680-2:2000	Machinery of forestry ― Safety requirements and testing for pole-mounted powered pruners Part 2﹕Units for use with an independent or back power source (ISO 11680-2:2000) 林业机器：动力杆式修枝锯的安全要求与试验第2部分：背负式杆式修枝剪剪(ISO 11680-2:2000)
EN ISO 11681-2:1998	Machinery for forestry ― Portable chain-saws ― Safety requirements and testing Part 2﹕Chain-saws for tree service (ISO 11681-2:1998) 林业机器：携带式电锯安全要求与试验第2部分：树木链锯
EN ISO 11688-1:1998	Acoustics ― Recommended practice for the design of low-noise machinery and equipment Part 1﹕Planning 声学：低噪音机械与设备的设计之建议实务第1部分：计划 (ISO TR 11688-1:1995)
EN ISO 11691:1995	Acoustics ― Measurement of insertion loss of ducted silencers without flow ― Laboratory survey method (ISO 11691:1995) 声学：无气流管道***插入损失的测量　实验室测量法
EN ISO 11806:1997	Agricultural and forestry machinery ― Portable hand-held combustion engine driven brush cutters and grass trimmers ―Safety (ISO 11806:1997) 农业与林业机械：由内燃机驱动的手提式割灌机和割草机之安全性 (ISO 11806:1997)
EN ISO 11957:1996	Acoustics ― Determination of sound insulation performance of cabins ― Laboratory and in situ measurements (ISO 11957:1996) 声学：客舱隔声性能的测定　实验室测量和现场测量

EN ISO 12001:1996	Acoustics ― Noise emitted by machinery and equipment ― Rules for the drafting and presentation of a noise test code (ISO 12001:1996) 声学：机械与设备的噪音噪音测量标准的制定与结构行程的规则(ISO 12001:1996)
EN 12012-1:2000	Rubber and plastics machines ― Sizes reduction machines ― Part 1﹕Safety requirements for blade granulators 橡胶与塑料机械：粉碎机第1部分：刀片碎化器之安全要求
EN 12012-2:2001	Rubber and plastic machines ― Safety ― Size reduction machines ― Requirements for the design and construction Part 2﹕Safety requirements for strand pelletizers 橡胶与塑料机械：粉碎机第2部分：粒度缩小机安全要求
EN 12012-3:2001	Rubber and plastic machines ― Size reduction machines Part 3﹕Safety requirements for shredders 橡胶与塑料机械：粉碎机第3部分：破碎机的安全要求
EN 12013:2000	Rubber and plastic machines ― Internal mixers ― Safety requirements 橡胶与塑料加工机械：内部混合机 — 安全要求
EN 12016:1998	Electromagnetic compatibility ― Product family standard for lifts, escalators and passenger conveyors ― Immunity 电磁兼容性：起重机、电扶梯、载客用传输机的产品系列标准 — 抗干扰性
EN 12041:2000	Food processing machinery ― Moulders ― Safety and hygiene requirements 食品加工机械：模具机之安全与卫生要求
EN 12043:2000	Food processing machinery ― Intermediate provers ― Safety and hygiene requirements 食品加工机械：食品加工机械.中间校准仪.安全和卫生要求
EN 12053:2000	Safety of industrial trucks ― Test methods for measuring noise emissions 工业卡车之安全性：噪音发射的测试方法

EN 12077-2:1998	Cranes safety ― Requirements for health and safety Part 2﹕Limiting and indicating devices 起重机之安全性：卫生与安全的要求第2部分：限制与指示装置
EN 12110:2002	Tunnelling machines ― Air locks ― Safety requirements 隧道开凿机械：气塞之安全要求
EN 12111:2002	Tunnelling machines ― Road headers, continuous miners and impact rippers ― Safety requirements 隧道开凿机械：道路镦锻机、连续开采机和掘进机之安全要求
EN12158-1:2000	Builders hoists for the transport of goods Part 1﹕Hoists with accessible platforms 货物用建筑提升机：第1部分：具有易卸平台的升降机
EN12158-2:2000	Builders hoists goods ― Part 2﹕Inclined hoists with non-accessible load carrying devices 货物用建筑提升机：第2部分：无易卸承载装置的斜提升机
EN 12162:2001	Liquid pumps ― Safety requirements ― Procedure for hydrostatic testing 液压泵：安全要求 — 流体静压试验过程
EN 12198-1:2000	Safety of machinery ― Assessment and reduction of risks arising from radiation emitted by machinery Part 1﹕ General principles 机械安全：由机械辐射而产生的风险评估与降低第1部分：一般原则
EN 12198-2:2000	Safety of machinery ― Assessment and reduction of risks arising from radiation emitted by machinery Part 2﹕Radiation emission measurement procedure 机械安全：机械发射的辐射产生的危险的评定和减少第2部分：辐射剂量的测量程序
EN 12198-3:2002	Safety of machinery ― Assessment and reduction of risks arising from radiation emitted by machinery Part 3﹕Reduction of radiation by attenuation or screening 机械安全：机械发射的辐射产生的危险的评定和减少第3部分：通过衰变或屏障减少辐射

EN 12254:1998 +

EN 12254/A1:2002

Screens for laser working places ―

Safety requirements and testing

雷射工作场所屏障：安全要求与试验

EN 12267:2003

Food processing machinery ― Circular saw machines

Safety and hygiene requirements

食品加工机械：圆盘锯之安全与卫生要求

EN 12268:2003

Food processing machinery ― Band saw machines ― Safety and hygiene requirements

食品加工机械：带锯机之安全与卫生要求

EN12301:2000

Rubber and plastics machines ―

Calenders ― Safety requirements

橡胶与塑料机械：轮压机之安全要求

EN 12312-1:2001